AfterDawn > Downloads > Systeemtools > Systeeminformatie > HWiNFO64 (Portable) > Versie historie

Versie historie van HWiNFO64 (Portable)

<<Terug naar software beschrijving

Veranderingen voor v5.72 - v5.74

  • Added several new Intel and AMD CPU models.
  • Fixed a possible crash on some later AMD GPUs.
  • Updated disk activity sensor names on some systems.
  • Fixed a possible crash on some systems with multiple network adapters.
  • Fixed crashing on AMD Vega M GPUs (Kaby Lake-G).
  • Enhanced sensor monitoring on ASUS ROG STRIX X370-I GAMING.
  • Fixed summary window size when changing monitor scaling.
  • Enhanced sensor monitoring on ASRock H110M-DGS.
  • Updated reporting of ASUS waterflow sensors.
  • Enhanced sensor monitoring on ASUS WS-C621E-SAGE.
  • Fixed a possible crash during short report file creation on systems with NVMe.
  • Enhanced sensor monitoring on ASUS ROG STRIX B350-I GAMING.
  • Enhanced sensor monitoring on ASUS TUF B350M-PLUS GAMING and B350M-DRAGON.


Veranderingen voor v5.58 - v5.60

  • Enhanced sensor monitoring on ASUS STRIX Z370-E,-F,-G,-H,-I GAMING.
  • Enhanced sensor monitoring on ASUS PRIME Z370-A,-P.
  • Enhanced sensor monitoring on ASUS TUF Z370-PLUS,-PRO GAMING.
  • Enhanced sensor monitoring on ASUS MAXIMUS X APEX.
  • Enhanced sensor monitoring on GIGABYTE Z370 series.
  • Fixed sensor monitoring on some MSI mainboards for Ryzen.
  • Added option to make the sensors window always on top.
  • Fixed sensor monitoring on ASRock Z270M Pro4, H270M Pro4, H270M Performance.
  • Added NVIDIA GeForce GTX 1070 Ti.
  • Added several new NVIDIA Volta models (GV100-A, GV100-B), Tesla V100.
  • Enhanced sensor monitoring on some ASRock X299 and Z370 series.
  • Added monitoring of GPU Hot Spot Temperature for AMD Vega.
  • Added monitoring of GPU SoC clock for AMD Vega.
  • Added reporting of NVIDIA GeForce driver version.
  • Fixed reporting of Radeon Vega GPU chip power since Crimson ReLive Fall Creators Update.
  • Fixed reading of W_PUMP+ on some ASUS mainboards.
  • Updated reporting of SVI2 telemetry for Threadripper.


Veranderingen voor v5.56 - v5.58

  • Fixed reporting of GPU VDDC and MVDCC on AMD Radeon RX Vega.
  • Fixed reporting of GPU memory current/power on AMD Radeon RX Vega.
  • Fixed monitoring of some disk activity sensors.
  • Enhanced sensor monitoring on ASRock X399 series.
  • Added preliminary support of Intel Ice Lake.
  • Updated monitoring of GPU Chip Power on AMD Radeon RX Vega.
  • Fixed reporting of estimated efficiency of some Corsair PSUs.
  • Enhanced sensor monitoring on MSI Z370 series.
  • Enhanced sensor monitoring on Biostar TB250 series.


Veranderingen voor v5.52 - v5.54

  • Extended reporting of NVMe drive temperatures and added thresholds to sensors.
  • Improved calculation of Corsair PSU efficiency.
  • Added monitoring of EVGA iCX additional GPU temperatures and fans.
  • Added support of Corsair Link Commander Pro (CLCP).
  • Added reporting of CPU process technology (nm).
  • Added monitoring of NVIDA GPU performance limiting reasons.
  • Enhanced sensor monitoring on ASUS ROG STRIX X299-E GAMING.
  • Enhanced sensor monitoring on ASUS PRIME X299-A, PRIME X299-DELUXE and TUF X299 series.
  • Enhanced sensor monitoring on MSI X299 series mainboards.
  • Improved measuring of BCLK on Skylake-X.
  • Fixed a bug causing Shift- and Alt- hot key combinations not to work properly.
  • Added support of RTSS OSD custom colors (requires RTSS v7.0.0 or later).
  • Added support of RTSS OSD graphs (requires RTSS v7.0.0 beta 24 or later).
  • Added AMD Radeon Vega Frontier Edition.
  • Added option to specify custom/fixed font size for tray icons.
  • Improved option for number alignment in RTSS OSD.
  • Enhanced sensor monitoring on ASUS ROG ZENITH EXTREME.
  • Enhanced sensor monitoring on GIGABYTE X299 series.
  • Enhanced support of AMD Radeon Vega.


Veranderingen voor v5.50 - v5.52

  • Enhanced sensor monitoring on some ASRock B350 series mainboards.Added NVIDIA TITAN Xp.Enhanced sensor monitoring on ASUS PRIME A320M-K.Fixed a possible crash on some systems with invalid driver dates.Enhanced sensor monitoring on EVGA X99 Micro.Enhanced sensor monitoring on some later Intel NUC systems.Added Intel Cannon Lake PCH and Lewisburg SKU brand names.Enhanced enumeration of USB hubs.Enhanced sensor monitoring on ASUS PRIME X370-A.Fixed sensor monitoring on some MSI X370/B350 series mainboards.Fixed VDD/NB voltage monitoring on Richtek RT8894A/ASP1106.Added a new option for AMD GPUs to prefer ADL information instead of direct instantaneous methods.Added a new sensor column to show profiling time (time required to read entire sensor and value data).Fixed a possible hang on some secondary NVIDIA GPUs.Added support of ATA Device Statistics.Fixed reporting of Trfc on Ryzen when DIMM0 is not populated.Enhanced sensor monitoring on ASUS ROG STRIX X370-F and ROG STRIX B350-F.


Veranderingen voor v5.46 - v5.50

  • Added NVIDIA GeForce GTX 1080 Ti.Fixed reporting of AMD Ryzen memory timings if first memory controller is not active.Fixed occasional erratic sensor readouts on ASUS CROSSHAIR VI HERO.Added reporting of SMU Firmware Revision for AMD Ryzen.Enhanced sensor monitoring on ASUS SABERTOOTH 990FX R3.0.Fixed reporting of CPB status on AMD Ryzen.Simplified adjusting of sensor item settings via right-click context menu.Added board-level monitoring of CPU current and power on ASUS CROSSHAIR VI and PRIME X370.Enhanced sensor monitoring on GIGABYTE X370 series mainboards.Enhanced sensor monitoring on some ASRock X370 series mainboards.Added support of some later Corsair H110i coolers.Added reporting of AMD AGESA version.Added a new telemetry method to monitor Ryzen CPU+SoC voltage, current and power.Improved support of Intel Skylake-SP.Fixed monitoring of water sensor temperatures on ASUS MAXIMUS IX and CROSSHAIR VI series.Added AMD Radeon RX 570 and RX 580.


Veranderingen voor v5.44 - v5.46

  • Added sensor table row shading.Fixed detection of some On Semi/ASUS EPU2 sensors.Enhanced support of Intel Coffee Lake.Enhanced sensor monitoring on MSI Ryzen mainboards.Added fan speed monitoring on ASUS X75 series notebooks.Fixed capacity reporting for drives with more than 512B logical sector size.Raised maximum number of remote monitored machines to 50.Added AMD Ryzen logo.Enhanced sensor monitoring on some ASUS X370 and B350 series mainboards.Enhanced sensor monitoring on some GIGABYTE X370 and B350 series mainboards.Improved appearance of transparent sensor tray icons.Added support of ITE IT8655E LPC.Added support of NVMe drives in Intel RST RAID mode.


Veranderingen voor v5.40 - v5.44

  • Fixed reporting of AMD GPU fan speed when not spinning.Fixed support of multi-node AMD CPUs.Enhanced sensor monitoring on more ASUS 200-series mainboards.Enhanced sensor monitoring on several ASRock 100- and 200-series mainboards.Added NVIDIA Quadro P400,P600,P1000,P3000,P4000,P5000, Quadro GP100, Tesla P6.Added monitoring of NXZT Kraken X52.Fixed reporting of ECC support for DDR4 moduels.Added support of ITE IT8915FN monitoring on GPU.Added preliminary support of Intel Cannon Lake.


Veranderingen voor v5.34 - v5.38

  • Improved GPU I2C caching for faster startup on some GPUs.Fixed a possible crash on some systems with IPMI.Added monitoring of GPU Chip Power (estimated) for AMD Hawaii and later GPUs.Improved monitoring Frames per Second (FPS) via RTSS.Fixed some sensor values for ASUS Z170I PRO GAMING.Enhanced NVIDIA SLI status reporting.Added NVIDIA GeForce GTX 1050 and GTX 1050 Ti.Enhanced/fixed sensor monitoring on some ASUS, MSI and GIGABYTE mainboards.Added AMD Radeon Pro WX 4100, 5100, 7100 and Radeon E9260.Added support of ITE IT8686E LPC/hardware monitor.Enhanced sensor monitoring on GIGABYTE Z270 series (preliminary).Improved reporting of some disk S.M.A.R.T. attributes.Added reporting of OPN for some AMD CPUs.


Veranderingen voor v5.32 - v5.34

  • Added monitoring of extension and assistant fans on some ASUS X99/Z170 series.Added option to change sensor logging (CSV) separator.Added option to specify individual polling rate for disk S.M.A.R.T. status.Added support of more International Rectifier PMBus-compliant VRMs.Added switching between screens using arrow keys on Logitech G19 LCD.Added synchronization with Corsair Link Software v4.2.4.25 and later.Added option to disable NVML support to workaround a bug in NVIDIA SLI-enabled systems using R368 and some later drivers.Added reporting of PSU efficiency for Corsair AXi/HXi/RMi series.Enhanced sensor monitoring on ASRock E3V5 WS.Added fan speed and additional temperature monitoring on HP Z440 Workstation.Added C-State Residency monitoring for Intel CPUs.Added preserving of column widths for all lists in the sensors screen.Added NVIDIA Tesla P100, Titan X (Pascal), Quadro P6000, Quadro P5000 and GeForce GTX 1060 3GB.Improved monitoring of Corsair H80i v2, H100i v2 and H115i.


Veranderingen voor v5.20 - v5.24

  • Fixed SMBus problems on MSI 100-series mainboards with LED controllers.
  • Fixed a memory leak in server side of remote sensor monitoring.
  • Clicking the sensor graph plot area will toggle it to occupy the entire window width.
  • Added reporting of GPU TMU count.
  • Added AMD Radeon Pro Duo.
  • Enhanced NVMe support.
  • Enhanced sensor monitoring on ASUS Z97-PRO GAMER.
  • Fixed a rare crash during closing on some machines with NVIDIA GPU.
  • Added monitoring of CPU Power Limits on systems where these can change during runtime.


Veranderingen voor v5.12 - v5.20

  • Fixed monitoring of total/NAND reads/writes for some SanDisk drives.
  • Extended NVMe S.M.A.R.T. status and fixed total writes amount.
  • Fixed reporting of sub-zero temperatures on NVIDIA GPUs.
  • Added support of Samsung SSD 950 Pro using the default Microsoft NVMe driver.
  • Added preliminary support of AMD Ellesmere, Baffin, Greenland.
  • Fixed GPU I2C access on AMD Tonga/Amethyst.
  • Added options to choose which type of values (current, mix, max, average) to show in tray, LG LCD and RTSS.
  • Enhanced sensor monitoring on ASUS Z170-PREMIUM.
  • Added support of IRF IR35201.
  • Added monitoring of page file usage.
  • Added support of Corsair H80i v2, H100i v2 and H115i.
  • Improved monitoring of WHEA errors.
  • Enabled GPU I2C access on Fiji (GPU VRM monitoring). Might need Reset GPU I2C Cache first.
  • Enhanced sensor monitoring on ASUS Z97-P.
  • Enhanced DELL EC sensor monitoring.


Veranderingen voor v5.10 - v5.12

  • Improved drive scan safety.
  • Improved sensor list color notification of alarms.
  • Enhanced support of Intel Kaby Lake.
  • Added monitoring of Windows Hardware Error Architecture (WHEA) errors.
  • Updated sensor graphs to reflect custom value formats.
  • Added support of direct-connected Corsair AXi/HXi series PSUs.
  • Added monitoring of drive/NAND lifetime reads/writes (S.M.A.R.T.).
  • Added monitoring of drive read/write total since last boot.


Veranderingen voor v5.04 - v5.10

  • Enhanced support of Intel Knights Landing.
  • Enhanced support of Intel Kaby Lake and Denverton.
  • Added workaround for some Intel RSTe drivers causing crash.
  • Added new sensor to monitor current memory timings.
  • Restored lost Windows 98 compatibility.
  • Added monitoring of Thermaltake DPS PSUs.
  • Added monitoring of Enermax Digifanless PSUs.
  • Added monitoring of Corsair RMi and HXi series PSUs.
  • Enhanced sensor monitoring on ASUS H110 series.
  • Enhanced reporting of ATA features (security, version).
  • Fixed SMART reporting on Samsung NVMe drives (requires latest 950 Pro driver).
  • Added option to show average values in tray and to divide values by 1000.
  • Added ability to specify a custom period (last N samples) for calculating average sensor values.
  • Fixed monitoring of AMD Carrizo and Nolan CPU sensors.
  • Added monitoring of HID-capable UPS devices.
  • Fixed enumeration of some USB3 xHCI Controllers.


Veranderingen voor v4.60 - v4.62

  • Enhanced sensor monitoring on ASUS SABERTOOTH X99.
  • Added monitoring of some unknown EC voltages for ASUS X99/RAMPAGE V series.
  • Enhanced sensor monitoring on Intel Rock Canyon NUCs.
  • Enhanced sensor monitoring on EVGA E999.
  • Enhanced sensor monitoring on GIGABYTE G1.Sniper M5.
  • Fixed detection of ACPI sensor.
  • Enhanced support of CPUs with more than 256 logical cores.
  • Enhanced preliminary support of Knights Landing.
  • Fixed a rare drop to 0 of BCLK and other related values in sensors.
  • Added ability to define custom colors and font style of items in sensor window.
  • Added ability to change sensor item color when an alert is triggered.


Veranderingen voor v4.50 - v4.60

  • Added support of Intersil ISL6388 digital PWM.
  • Fixed sensor monitoring on some ASUS P8H67 series with IT8771.
  • Improved BCLK measurement on Skylake.
  • Enhanced sensor monitoring on ASRock Z97 OC Formula.
  • Added option to disable GPU reordering.
  • Fixed monitoring of Max CPU/Thread and Total CPU usage so that it reflects only the particular CPU package.
  • Added preliminary support of Intersil ISL6367 and ISL6379 (for ASRock boards only yet).
  • Enhanced sensor monitoring on ASUS Z10PE-D8 WS.
  • Added ability to display multiple sensor lists.
  • Added support of multi-row operations in sensors window.
  • Added ability to rename sensor titles.
  • Added component names (mainboard, system name) to sensor titles.
  • Added support of AMD Nolan.
  • Improved appearance on high-DPI scaled screens.
  • Improved reporting of S.M.A.R.T. attributes per SSD controller type.
  • Reduced memory module scan time on Sandy Bridge-E/EN/EP/EX and later server CPUs.
  • Enhanced support of NVIDIA Tesla GPUs - clocks, memory parameters, usage, power, fan speed.
  • Fixed a possible crash on some systems with more than ~400 sensors.
  • Added NVIDIA GeForce GTX TITAN X.


Veranderingen voor v4.48 - v4.50

  • Added possibility to backup application- and user-specific settings.
  • Added option to minimize sensors window instead of closing.
  • Improved rendering of tray icons.
  • Minor updates to UI functionality and hardware support.
  • Added preliminary monitoring of Corsair Link devices (H80, H100, etc.). Must not be used along with other Corsair Link tools!
  • Fixed rounding of some values in tray icons.
  • Added reporting of GPU Memory vendor for NVIDIA GPUs (requires driver R346 or later).
  • Added reporting of GPU Normalized Power for NVIDIA GPUs.
  • Added reporting of GPU Video Engine clock for NVIDIA GPUs.
  • Enhanced support of Corsair Link, added support of PSUs.
  • Fixed a rare crash when running in Debug Mode.
  • Added support of Aquastream XT, MPS and PowerAdjust.
  • Changed order of NVIDIA and AMD GPUs in multi-GPU systems, so that the primary GPU device is properly listed as the first one.
  • Added NVIDIA GeForce GTX 960 and GM206 support.
  • Added support for monitoring of Corsair RM PSUs.


Veranderingen voor v4.46 - v4.48

  • Improved sensor indexing. For some addons (i.e. HWiNFOMonitor, Rainmeter) it will be required to download latest versions and reconfigure existing settings.
  • Fixed changing of sensor items order via the layout tab.
  • Added reading of sensor values from Aquaero (preliminary).
  • Improved support of Skylake-E/EP/EX.
  • Added a workaround for some crashes caused by Intel RST enterprise drivers.
  • Added ability to toggle RTSS/OSD output via a user-defined hotkey.
  • Improved Intel ME information.
  • Enhanced information returned for ASPEED GPUs.
  • Enhanced Broadwell-E/EN/EP/EX support.
  • Added ability to show/hide all sensor entries of a given type (temperatures, fans, etc.)
  • Added support of Giantec Semi GT34TS04 TSOD.


Veranderingen voor v4.44 - v4.46

  • Fixed monitoring of additional voltages on ASUS SABERTOOTH 990FX.
  • Added reporting of per-core CPU ratios, bus clock, HT/QPI/KTI and EDRAM clocks in sensors.
  • Enabling of PCH Thermal Device is disabled by default and can be enabled via a new option.
  • Added support of Atmel AT30TSE004 Thermal Sensor On DIMM.
  • Added an extended method of waking up disabled dGPUs (enable via settings).
  • Added new NVIDIA Maxwell GPUs.
  • Fixed monitoring of slower fans on Fintek LPCs.
  • Improved support of NVIDIA GeForce GTX 970 and GTX 980.
  • Fixed displaying of degree sign in sensors for Chinese, Japanese and Korean locales.
  • Fixed reporting of fan #6 speed for Nuvoton NCT679x.
  • Added Drag and Drop support in sensors window as a more convenient way to change order of items or hide (drop outside).
  • Enhanced sensor monitoring on GIGABYTE X99 series.
  • Added support of ITE IT8606E and IT8626E.


Veranderingen voor v4.42 - v4.44

  • Enhanced sensor monitoring on additional MSI 9-series mainboards.
  • Fixed restoring of sensors window position on some systems with multiple monitors.
  • Fixed reporting of invalid values in graphs, tray, LCD, OSD.
  • Added support of Lewisburg PCH.
  • Added preliminary support of NVIDIA GeForce GTX 870 and 880 (GM204).
  • Sensor minimize button will minimize graphs too.
  • Added ability to rename sensor units.
  • Added ability to modify sensor values (constant multiply/add).
  • Added support of On Semi ASP1106D.
  • Fixed reporting of memory clock on Haswell-E/EN/EP/EX.
  • Improved DDR4 support.
  • Enhanced sensor monitoring on ASUS X99 series.
  • Enhanced sensor monitoring on MSI X99 series.
  • Patch for occasional invalid BCLK measurement.
  • Enhanced sensor monitoring on ASUS RAMPAGE V EXTREME.
  • Enhanced sensor monitoring on ASUS CROSSBLADE RANGER.
  • Added AMD Radeon R9 285.
  • Enhanced sensor monitoring on ASRock X99 series.


Veranderingen voor v4.40 - v4.42

  • Added preliminary support of PCI Express 4.0.
  • Enhanced sensor monitoring on MSI 8-series.
  • Added monitoring of FPS counter from RTSS.
  • Enhanced preliminary support of Braswell.
  • Enhanced sensor monitoring on ASUS J1900 series.
  • Enhanced preliminary support of Skylake.
  • Added reporting of Intel CPU EDRAM clock.
  • Enhanced sensor monitoring on MSI J1900 series.
  • Enhanced sensor monitoring on ASUS A78M-A.
  • Improved sensor window GUI.
  • Enhanced sensor monitoring on ASUS MAXIMUS VII FORMULA.
  • Fixed reporting of Min sensor values in some cases when the value reaches 0.
  • Added option to define number of consecutive samples to trigger an alarm.


Veranderingen voor v4.38 - v4.40

  • Enhanced sensor monitoring on several ASUS Z97 and H97 models.
  • Enhanced sensor monitoring on GIGABYTE Z97 models.
  • Fixed reporting of OS UEFI Boot.
  • Fixed support of AMD Oland/Mars/Sun/Jet GPUs.
  • Fixed reporting of DDR3 memory timings for some modules.
  • Added support of IRF IR3580.
  • Enhanced sensor monitoring on ASUS MAXIMUS VII series.
  • Enhanced sensor monitoring on ASRock Z97 and H97 series.
  • Enhanced sensor monitoring on ASRock Z87 and H97 ITX series.
  • Added option to hide Welcome screen and Detection progress.


Veranderingen voor v4.36 - v4.38

  • Improved support of Haswell-E/EN/EP/EX.
  • Fixed identification of Crystal Well-DT.
  • Enhanced Broadwell and Skylake support.
  • Improved DDR4 support.
  • Enhanced sensor monitoring on MSI 9-Series mainboards.
  • Added support of AMD Memory Profile (AMP).
  • Added support of Nuvoton NCT6792D LPC/HW monitor.
  • Added NVIDIA GeForce GTX TITAN Z.
  • Fixed putting some AMD DGPUs back into off state.
  • Improved identification of AMD Hudson/Bolton FCH models.


Veranderingen voor v4.34 - v4.36

  • Added caching of GPU I2C devices to speed-up the scan process.Added support of more NVIDIA GM107 and GM108 models.Added reporting in summary whether VT-x/AMD-V is enabled in BIOS.Fixed support of DDR4 SDRAM.Summary page redesign. Per-core clocks are now in a separate window, which allows more cores to be displayed.Added NVIDIA GeForce GTX 745.Added support of AMD Carrizo.Added patch for buggy OpenCL drivers causing crash during init.Added reporting whether system has booted in UEFI mode.Improved CPU sensor addressing on Sandy Bridge and later systems with multiple CPU sockets.


Veranderingen voor v4.32 - v4.34

  • Added ability to change text color of tray icons.
  • Added ability to start sensor logging using a hot key.
  • Added ability to snap sensor window to screen edges.
  • Added ability to snap sensor graphs to screen edges or each other.
  • Added NVIDIA GeForce GTX Titan Black.
  • Added NVIDIA Maxwell: GeForce 840M, GeForce GTX 750/750 Ti.
  • Reduced file/package size by 320 KB.
  • Improved reporting of GPU bus when disabled by NVIDIA Optimus.
  • Fixed restoring of NVIDIA Optimus disabled GPUs state after start.
  • Fixed reporting of L1/L2 cache multipliers on some CPUs.
  • Several minor improvements and fixes.
  • Fixed a possible crash on some AMD GPUs while playing video.
  • Added NVIDIA GeForce GTX 850M and 860M.
  • Enhanced sensor monitoring on ASRock Z87, HM87 and FM2A88 series.


Veranderingen voor v4.30 - v4.32

  • Fixed reporting of drive warning on some SSDs.
  • Added NVIDIA Tesla K40m, K40st, K40s.
  • Enhanced sensor monitoring on MSI 8-series mainboards.
  • Fixed Intel CPU sensor on Haswell-U/Y.
  • Improved recognition of CHiL CHL8318/CHL8266 on GPU.
  • Enhanced sensor monitoring on MSI NF750-G55.
  • Fixed reporting of sensor values on AMD GPUs after ULPS/powerdown restart.
  • Fixed enumeration of later AMD DGPUs disabled by PowerXpress.
  • Fixed sensor monitoring on ASUS MAXIMUS VI.
  • Added monitoring of TSOD on SNB/IVB/HSW/BDW-E/EN/EP/EX.
  • Fixed font size selection for LG LCD.
  • Fixed reporting of GPU clock/VID on Haswell GT1.5 SKUs.
  • Added option to lock sensor order (enabled by default). If sensor order was changed in the past, this option needs to be disabled first.
  • Added support of ITE IT8620E HW monitor.
  • Enhanced sensor monitoring on GIGABYTE A88X series.


Veranderingen voor v4.26 - v4.30

  • Enhanced support of AMD Hawaii (Radeon R9 290 series).
  • Added reporting of GPU Memory Utilization for AMD GCN2 family.
  • Added option to disable Intel Management Engine support.
  • Added NVIDIA GeForce GTX 780 Ti.
  • Added monitoring of disk read/write/total activity and transfer rate.
  • Improved reporting of GPU clock on AMD APUs.
  • Fixed reporting of GPU clock for AMD GCN2 family.
  • Fixed a rare occurring crash on later AMD GPUs.
  • Fixed detection of NCP4206 on nVidia GPUs.
  • Added monitoring of network adapter DL/UP rate and total transfer for Windows Vista and later.
  • Enhanced support of Nuvoton NCT6106D.
  • Enhanced sensor monitoring on ASUS X79-DELUXE and RAMPAGE IV BLACK EDITION.
  • Fixed including of disabled sections in the report file.


Veranderingen voor v4.24 - v4.26

  • Added support of RTSS 5.3.2+ for OSD with up-to 4096 characters.
  • Added reporting of drive warning status based on SMART.
  • Added drive health status icon (OK/Warning/Failure) to summary window.
  • Improved enumeration of USB-ATA drives.
  • Enhanced sensor monitoring on ASUS A88X series.
  • Added reporting of GPU clock and improved support of Bay Trail.
  • Added nVidia Quadro K6000, GeForce GTX 760 Ti OEM.
  • Enhanced reporting of SATA features and current transfer rate.
  • Improved ICC support.
  • Enhanced sensor monitoring on ASUS A55M series.
  • Enhanced sensor monitoring on Intel DZ87 series.


Veranderingen voor v4.22 - v4.24

  • Added option to disable flushing of file buffers during start.
  • Added several new Intel CPU models and SSPEC codes.
  • Added reporting of SATA HIPM and DIPM.
  • Fixed crash on some Windows 8.1 systems.
  • Added support of ITE IT8790E.
  • Enhanced sensor monitoring on Gigabyte Z87-OC and Z87X-UD5H.
  • Rewritten drive detection method for more flexibility.
  • Drive sensors order change on many systems, so a layout order reset and reconfiguration of plugins might be required.
  • Added ability to detect current SATA transfer rate for certain controllers.
  • Fixed showing of nonsense sensor values on some systems.
  • Enhanced sensor monitoring on Foxconn H77 series.
  • Improved Auto Start via TaskScheduler.
  • Added support of Intel 9-Series PCH.


Veranderingen voor v4.20 Build 1960 - v4.22

  • Updated Auto Start option to use TaskScheduler on Windows Vista and later (avoids UAC prompt).
  • Added AMD FirePro S9000 and S10000.
  • Enhanced sensor monitoring on ASUS Z9PE.
  • Enhanced sensor monitoring on Gigabyte H87, B85 and G1.Sniper B5 series.
  • Enhanced reporting of CPU features in summary window.
  • Added reporting of GPU clock on Intel Cedarview.
  • Added reporting of new CPU features: AVX-512, ADX, SMAP, IPT, SHA.
  • Improved tracking of values in sensor graphs.
  • Added new nVidia GPU models: GeForce GT 710M,755M, Quadro K510M,K2100M,K4100M, GRID K100 and GRID K200.
  • Added support of Intel Broadwell family.
  • Added AMD Volcanic Islands/Crystal: Maui, Iceland/Topaz, Tonga/Amethyst.
  • Added AMD Pirate Islands: Bermuda, Fiji, Treasure.
  • Added AMD Carrizo, Amur, Bhavani.


Veranderingen voor v4.18 Build 1930 - v4.20 Build 1960

  • Enhanced sensor monitoring on ASUS Z87 series mainboards.
  • Improved reporting of memory timings on Haswell.
  • Disabled GPU I2C scan on DELL laptops with ATI FirePro M7820.
  • Enhanced support of CHL8266 and CHL8318 on GPUs.
  • Enhanced sensor monitoring on Gigabyte 990XA/990FXA mainboards.
  • Enhanced reporting of GPU clock on AMD Trinity, Richland and Kabini.
  • Enhanced sensor monitoring on Biostar A55/A75/A85 series mainboards.
  • Enhanced sensor monitoring on ASRock Z87 series mainboards.
  • Added nVidia GeForce GTX 775M.
  • Enhanced sensor monitoring on ASUS H87, B85, Q87, Z87, P9D WS, SABERTOOTH Z87, GRYPHON Z87 and MAXIMUS VI series.
  • Enhanced sensor monitoring on MSI Z87 series.
  • Fixed support of Nuvoton NCT6791.
  • Enhanced sensor monitoring on GIGABYTE Z87 series.
  • Added AMD Mullins, Hawaii and Vesuvius.
  • Sensor configuration redesign.
  • Added ability to show/hide sensor window columns.
  • Added ability to change position of sensor items.
  • Added enumeration and SMART monitoring of USB-ATA drives.


Veranderingen voor v4.16 Build 1900 - v4.18 Build 1930

  • Fixed reporting of GPU Power/Current on certain CHL controllers.
  • Added support of CHL8203, CHL8212 and CHL8213 on GPU.
  • Added preliminary support ITE IT8732.
  • Separated reporting of GPU codename.
  • Improved Intel Haswell support.
  • Improved AMD Kabini support.
  • Added AMD Radeon HD 7990 (Malta).
  • Added reporting of GPU Serial Number for later ATI/AMD GPUs.
  • Enhanced sensor monitoring on Apple machines.
  • Added AMD Radeon HD 7730.
  • Added support of NCT6683D hardware monitor.
  • Avoid polling of nVidia GPUs disabled by Optimus.
  • Added monitoring of some ACPI values.
  • Added monitoring of CPU Core/NB currents and powers on AMD Trinity, Richland and Kabini.
  • Added nVidia GeForce GTX 770 and GeForce GTX 780.


Veranderingen voor v4.14 Build 1880 - v4.16 Build 1900

  • Added support of additional CHiL/IR VRs on GPU.
  • Fixed enumeration of GPUs disabled by nVidia Optimus.
  • Fixed freezing of Synaptics SMBus touchpads on Intel chipsets.
  • Merged and rearranged nVidia Internal GPU sensor with NVAPI.
  • Added AMD Radeon HD 7790.
  • Added nVidia GeForce GTX 650 Ti Boost.
  • Added monitoring of D3D Usage on AMD, nVidia and Intel GPUs (covers Direct3D only).
  • Improved enumeration of RAID arrays, added RAID status reporting.
  • Enhanced sensor monitoring on nVidia nForce 790i reference mainboards (Zotac, EVGA, XFX, etc).
  • Enhanced support of AMD GCN2 family GPUs.
  • Added monitoring support for On Semi NCP81022 on GPU.
  • Added nVidia GF119 models: GeForce 705M.
  • Added nVidia GK104 models: Quadro K2 USM, Tesla K2 USM, GRID K520, GeForce K2 USM, NVS K2 USM.
  • Added nVidia GK106 models: GeForce GTX 760M, 765M, 770M.
  • Added nVidia GK107 models: Tesla K1 USM, Quadro K1 USM, GeForce GT 740M, 745M, 750M, GeForce K340 USM, NVS K1 USM, GRID K340, NVS 1000.
  • Added nVidia GK110 models: GeForce GTX Titan LE, Tesla K20, Tesla K20X.
  • Added nVidia GK208 models: GeForce GT 730M, 735M, 740M.


Veranderingen voor v4.12 Build 1850 - v4.14 Build 1880

  • Added reporting of Max CPU/Thread Usage.
  • Added monitoring of FPS via FRAPS (must be started before opening sensors window).
  • Fixed reporting of CPU usage on systems with multiple CPU groups.
  • Added nVidia GeForce GT 625 OEM, Tesla K20Xm, K20c, K20s, K20m and GeForce GTX Titan.
  • Enhanced sensor monitoring on MSI MS-7699.
  • Added GPU temperature monitoring for AMD Trinity, Kabini and Kaveri.
  • Added GPU utilization monitoring for AMD Trinity.
  • Fixed crash when closing program on certain UEFI-only systems.
  • Added GPU I2C support via ADL.
  • Improved GPU I2C scan in Debug Mode on nVidia GPUs.
  • Added support of SMSC EMC21xx sensor on GPU.
  • Added support of uPI uP1637 and CHL8318 on GPU.
  • Improved GPU I2C scan on AMD GPUs.


Veranderingen voor v4.10 Build 1820 - v4.12 Build 1850

  • Added several Haswell processor brand numbers.
  • Fixed crash on some GIGABYTE mainboards running Windows 8.
  • Enhanced sensor monitoring on GIGABYTE GA-78LMT series.
  • Enhanced support of Nuvoton NCT6791D HW monitor.
  • Several minor enhancements and fixes.
  • Enhanced sensor monitoring on ASUS MAXIMUS VI EXTREME.
  • Enhanced reporting of Intel ME status and features.
  • Improved reporting of GPU usage on AMD GPUs.
  • Improved sensor graphs.
  • Added monitoring of overall SMART health status.
  • Added reporting and monitoring of SSD remaining life.
  • Fixed measuring of current CPU clock on systems in xAPIC mode.
  • Added preliminary support of DDR4 DRAM.
  • Added reporting of average values in sensors window.


Veranderingen voor v4.08 Build 1800 - v4.10 Build 1820

  • Improved reading of SMBIOS DMI data on EFI BIOSes without CSM.
  • Added possibility to specify number of decimal digits displayed per each sensor value.
  • Added preliminary support of Valleyview, Avoton, Rangeley.
  • Added nVidia GeForce GTX 675MX and GTX 680MX.
  • Added several new Radeon 8000 series models.
  • Added support of ITE IT8623E LPC & hardware monitor.
  • Enhanced sensor monitoring on ASUS F2A85 series.
  • Added monitoring of GPU D3D Dedicated and Dynamic memory on AMD, Intel and nVidia GPUs.
  • Added ability to display tray icon color depending on alarm threshold.
  • Added reporting of CPU TDP for AMD Trinity, Kaveri and Kabini.
  • Enhanced sensor monitoring on MSI P6N SLI V2.
  • Enhanced sensor monitoring on ASUS M5A99 series.
  • Added monitoring of current PCIe link speed for GPUs.


Veranderingen voor v4.06 Build 1760 - v4.08 Build 1800

  • Improved sensor graphs, added resizing capability.
  • Enhanced sensor monitoring on ECS P67 and Z77 series.
  • Enhanced support of VT11xx sensor on GPU.
  • Improved handling of user-disabled sensors.
  • Improved CPU power measurement on AMD Bulldozer.
  • Added nVidia Tesla K20c and K20m.
  • Improved CPU clock measurement on Windows 8.
  • Fixed a very long scan of some later secondary AMD GPUs.
  • Added support of Fintek F71811/F71812 and F71877 LPC/hardware monitors.
  • Enhanced sensor monitoring on ASUS F2A55.
  • Added several new CPU and GPU models.


Veranderingen voor v4.04 Build 1730 - v4.06 Build 1760

  • Enhanced sensor monitoring on ASRock Z77, Z75, H77, B75, Q77, H71M and A75 series.
  • Minor bugfixes and improvements.
  • Driver management tool removed from package. Functionality moved into Configure section.
  • History file removed from package. Available online in the News section.
  • Help file replaced with on-line help (forum).
  • Embedded all supplemental files (DAT, drivers) into the main EXE file.
  • Reduced package content to 2 files only (EXE, INI).
  • Added reporting of GPU VDDC for later AMD GPUs.
  • Enhanced sensor monitoring on Gigabyte F2A85 series.
  • Added preliminary support of Nuvoton NCT6791D sensor.
  • Added AMD Sun, Neptune, Ibiza, Cozumel, Kauai, Hainan, Curacao, Aruba, Richland Devastator/Scrapper, Thebe, Kryptos, Samara, Pennar.
  • Added reporting of SATA AHCI/RAID controller and per-port information under PCI host device.
  • Fixed reporting of current memory clock on AMD Trinity.
  • Enhanced reporting of current memory parameters for Haswell.
  • Enhanced sensor monitoring on ASRock Z77 OC Formula.
  • Added support of Intel Wellsburg.
  • Added nVidia Quadro K2000, K2000D, K600, NVS 510, K5000, VGX K1, VGX K2.


Veranderingen voor v4.02 build 1700 - v4.04 Build 1730

  • Enhanced sensor monitoring on GIGABYTE B75 series.
  • Enhanced support of VIA VX11 chipset.
  • Added nVidia GeForce GTX 660 Ti, GeForce GTX 650 and Tesla K10.
  • Improved enumeration of (S)ATA drives.
  • Enhanced sensor monitoring on ASUS P7H55-M LX.
  • Reduced system load during sensor monitoring via certain SIO/LPC chips.
  • Added preliminary support of AMD Kabini (Jaguar CPU cores).
  • Added AMD FirePro V3900, V4900, V5900, W600, W5000, W7000, W8000, W9000.
  • Enhanced GPU I2C scan on nVidia Kepler.
  • Enhanced support of Ivy Bridge-EX.
  • Added preliminary support of Haswell-EN/EP/EP 4S/EX.
  • Improved recognition of Sandy Bridge/Ivy Bridge CPU package.
  • Improved reporting of clocks on some AMD GPUs with switchable graphics.
  • Enhanced sensor monitoring on ASUS P8C WS.
  • Added support of On Semi ASP0800 on nVidia GPU.
  • Added possibility to choose column for RivaTuner OSD server too.
  • Added Summary-only mode.
  • Fixed reporting of GPU memory clock and shader count on AMD Southern Islands and later families.


Veranderingen voor v4.00 Build 1680 - v4.02 build 1700

  • Added support of IRF IR3564.
  • Added preliminary support of AMD Mars.
  • Added fan speed monitoring on Clevo W860, W870, W880, P150, P170, P180.
  • Added preliminary support of AMD Steamroller family.
  • Fixed BSOD with certain Intel RST drivers.
  • Added support of IRF IR3563 Digital PWM.
  • Enhanced sensor monitoring on GIGABYTE Z77X-UP series.
  • Added nVidia Quadro K1000M, K2000M, K3000M, K4000M, K5000M.
  • Added nVidia GeForce GTX 650M and GeForce GTX 680M.
  • Enhanced sensor monitoring on ASUS MAXIMUS V EXTREME and MAXIMUS V FORMULA.


Veranderingen voor v3.96 Build 1640 - v4.00 Build 1680

  • Enhanced enumerating of SATA drives and respective SMART status reporting.
  • Improved sensor monitoring across Standby/Resume phases.
  • Enhanced sensor monitoring on ASUS SABERTOOTH 990FX.
  • Fixed missing bottom menu in sensor window on some systems with lower screen resolution.
  • Improved enumeration of USB ports and devices.
  • USB device enumeration is now attached to PCI USB Host Controllers too.
  • Fixed changing of values in sensor config.
  • Improved sensor monitoring performance on systems with Sandy Bridge and later CPUs and added reporting of PCH temperature.
  • Added reporting of driver information for major devices (PCI, USB, GPU, Audio, Network).
  • Added support of SMSC LPC47M534 sensor.
  • Updated SMBIOS support to v2.7.1.
  • Updated reporting of shader count on AMD Southern Islands and London series GPUs.
  • Enhanced sensor monitoring on ASUS P8H61-I.
  • Improved reporting of parameters on several AMD GPUs.
  • Added AMD Bonaire and Oland.


Veranderingen voor v3.95 Build 1600 - v3.96 Build 1640

  • Fixed GPU logo when switching between GPUs.
  • Improved GK1xx fan speed reporting.
  • Fixed reporting of GPU clocks for ATI R6xx family.
  • Added AMD Radeon HD 7420G, 7520G, 7620G, 7640G, 7660G, 7480D, 7540D, 7560D, 7660D models.
  • Added preliminary AMD Kaveri support.
  • Enhanced sensor monitoring on BIOSTAR A75 and TZ77 series.
  • Enhanced sensor monitoring on MSI X79 series.
  • Added nVidia GeForce GTX 670 and GeForce GTX 690.
  • Improved drive and SMART enumeration on systems with Intel Rapid Storage Technology drivers.
  • Fixed reporting of CPU DTS temperatures on multiple CPU packages.
  • Improved nVidia GPU voltage monitoring with nVidia R3xx drivers.
  • Added fan speed monitoring on ASUS G74Sx and G75VW notebooks.
  • Optimized performance and memory usage in Sensor-only mode.
  • Improved handling of RTSS.
  • Enhanced support of AMD Trinity.


Veranderingen voor v3.94 Build 1550 - v3.95 Build 1600

  • Enhanced support of GK104 (fixed clock status, added power monitoring).
  • Enhanced sensor monitoring on EVGA X79 and Z77 series.
  • Sensor logging: value units are now displayed in the header only.
  • Enhanced sensor monitoring on ASUS P8B75, P8H77, P8Q77, P8Z77, MAXIMUS V, SABERTOOTH Z77 series.
  • Enhanced sensor monitoring on ASRock X79 and Z77 series.
  • Added new CPU and GPU models.
  • Enhanced sensor monitoring on GIGABYTE H77 and Z77 series.
  • Improved CPU clock measurement on Windows 8.
  • Fixed reporting of XMP profile #2.
  • Enhanced support of PMBus VRs, added new CHiL and IRF models.
  • Enhanced sensor monitoring on MSI MS-7737 Big Bang-XPower II.
  • Added support of Crystal Well.


Veranderingen voor v3.93 Build 1530 - v3.94 Build 1550

  • Enhanced sensor monitoring on MSI MS-7585 P55-GD85, MS-7582 and Z77 series.
  • Added preliminary support of Coleto Creek PCH.
  • Added reporting of OEM Memory Information (DIMM map) under SMBIOS/DMI if supported by platform.
  • Enhanced sensor monitoring on ASUS P8H67-I.
  • Split Intel DTS temperature reporting per CPU package, added actual Core Max value.
  • Added recognition of nVidia Kepler: GeForce GT 640M, GT 650M, GTX 660M.
  • Added patch for clock measuring under Windows 8.
  • Added reporting of more Intel CPU features.
  • Added support of nVidia GeForce GTX 680 (GK104).


Veranderingen voor v3.92 Build 1500 - v3.93 Build 1530

  • Enhanced support of Intel Haswell family.
  • Fixed reporting of memory usage on nVidia GPUs in SLI.
  • Added support of CHL8228 to report GPU VRM temperatures, voltages, currents and power (Radeon HD 7970, etc).
  • Added preliminary Lynx Point support.
  • Added several new nVidia GPU models.
  • Enhanced reporting of Intel ME features.
  • Added preliminary nVidia Kepler (GK107) support.
  • Fixed Windows 8 support.
  • Added support of Intel Integrated Clock Control (ICC): reporting of clock capabilities and monitoring of actual status.
  • Enhanced sensor monitoring on ASUS P8Z77 series.


Veranderingen voor v3.91 Build 1470 - v3.92 Build 1500

  • Added recognition of Intel Knights Corner.
  • Added support of SMSC SCH5327 sensor monitoring.
  • General sensor monitoring improvement (performance, reliability).
  • Added preserving of graph positions.
  • Improved IPMI support.
  • Added reporting of Firmware Version Information (BIOS, OROM, Reference Code) under SMBIOS/DMI if supported by BIOS.
  • Enhanced support of AMD Southern Islands and London series (clock, config, sensors).
  • Added button to reset min/max values in sensors.
  • Added support of Nuvoton NCT6779D LPC/HW monitor.


Veranderingen voor v3.90 Build 1430 - v3.91 Build 1470

  • Added preliminary Haswell support.
  • Added reporting of CPU VID in sensors.
  • Enhanced sensor monitoring on Intel DX58OG and DX79 series.
  • Enhanced sensor monitoring on ASUS P9X79, RAMPAGE IV and SABERTOOTH X79 series.
  • Fixed restoring of tray icons in case explorer process is restarted.
  • Enhanced reporting of memory usage in sensors.
  • Improved sensor monitoring performance.
  • Changed PCI bus topology view.
  • Enhanced EC temperature and fan access on Alienware notebooks.
  • Various minor fixes and enhancements.
  • Added reporting of On-Demand Clock Modulation in sensors (Intel CPUs).
  • Added possibility to disable particular SMBus address scan (for advanced users).
  • Fixed possible fan speed fluctuations while monitoring of ATI/AMD GPU diode temperatures.
  • Enhanced sensor monitoring on GIGABYTE X79 G1.Assassin2 and X79 series.


Veranderingen voor v3.88 Build 1400 - v3.90 Build 1430

  • Improved sensor monitoring on multi-threaded systems.
  • Enhanced support of systems with multiple CPU groups.
  • Enhanced support of Nehalem-EX.
  • Added preliminary support of Ivy Bridge-EP/EX.
  • Extended new clock measurement method to AMD 10h and 15h families.
  • Enhanced NVAPI GPU fan speed monitoring.
  • Minor bugfixes and improvements.
  • Added support of XMP 1.3.
  • Added AMD PITCAIRN XT/PRO, WIMBLEDON XT.
  • Improved reporting of GPU Memory clock on later AMD GPUs (R700 and above).
  • Raised sensor limits.
  • Added reporting of system memory usage in sensors.


Veranderingen voor v3.86 Build 1370 - v3.88 Build 1400

  • Added support of AMD FT2 (Krishna) Processors.
  • Improved XTU support.
  • Added reporting of total CPU usage.
  • Enhanced sensor monitoring on MSI MS-7676 (Z68MA-ED5).
  • Added a new method for measuring CPU clock for Nehalem and later CPUs.
  • Fixed a possible crash on Sandy Bridge-E/EN/EP.
  • Fixed Sandy Bridge-E/EN/EP SPD read support.
  • Enhanced sensor monitoring on Intel DZ68 series.
  • Enhanced support of VIA Nano and later, added reporting of core temperatures.
  • Added reporting of current CPU core clock in sensors.
  • Added nVidia GeForce 610M and GeForce GT 630M.
  • Added possibility to include multiple items per one RivaTuner OSD line.
  • Enhanced sensor monitoring on ASRock 990FX.


Veranderingen voor v3.84 Build 1340 - v3.86 Build 1370

  • Added nVidia GeForce GTX 460 v2, GeForce GT 520MX and GeForce GTX 580M.
  • Enhanced sensor monitoring on ASRock 880G Pro3.
  • Enhanced sensor monitoring on GIGABYTE G1.Sniper 2.
  • Added support of new Panther Point SKUs.
  • Enhanced sensor monitoring on ASUS M5A97 series.
  • Added possibility to change the sensor scan interval.
  • Added EC-ACPI Synchonization (HWiNFO32/64 Embedded Controller requests are synchronized with ACPI).
  • Improved identification of Intel 6-series chipset B2/B3 stepping in case the Compatibility Revision ID feature is enabled.
  • Added nVidia GeForce GTX 570M.
  • Improved branding of AMD Family 15h (Bulldozer).
  • Fixed GPU Shader Count report for Blackcomb.
  • Added AMD CAPE VERDE and GREAT WALL.
  • Enhanced sensor monitoring on ASUS F1A55.


Veranderingen voor v3.83 Build 1330 - v3.84 Build 1340

  • Fixed W83667HG/NCT677x fan speeds bug from previous version.
  • Several minor updates and bug fixes.


<<Terug naar software beschrijving

Top downloads

Laatste toevoegingen

Help ons

Sections:

Follow us:

© 1999-2024 AfterDawn Oy. All rights reserved
Back to Top ⇧
AfterDawn is powered by Powered by UpCloud