Versie historie van ReClock
<<Terug naar software beschrijving
Veranderingen voor v1.9.0.3 beta - v1.9.0.6 Beta
- * New: Added support for PowerDVD 17
- * Change: Updated MediaInfo.dll to 0.7.95.0
- 1.9.0.5 beta - 08/05/2017
- * New: Added debug DWORD registry value "NoMediaInfo". If set to 1, the old DirectShow estimator will be used.
- 1.9.0.4 beta - 08/05/2017
- * Change: MediaInfo estimator improved
Veranderingen voor v1.9.0.0 - v1.9.0.3 beta
- * Change: MediaInfo estimator improved
- * Fix: Built in estimator was enabled for file playback by default.
- 1.9.0.2 beta - 22/12/2016
- * Fix: MediaInfo estimator treated audio files as video file
- 1.9.0.1 beta - 21/12/2016
- * New: Retired the old Direct Show framerate estimator for file playback
- - MediaInfo.dll (https://mediaarea.net/en/MediaInfo) is used instead
- - Using the built-in estimator is no longer recommended for file playback
- - Using the built-in estimator is no longer the default for file playback
- - Windows 9x is no longer supported. May it rest in peace.
- * New: Framerate cache was actually quite unusable.
- The behavior is changed:
- - default framerate will no longer stored in cache
- - setting a default framerate will not stop automatic detection, automatic
- detection will always override default framerate setting
- - setting a framerate manually during playback will store it in the cache
- - manually setting the framerate to "unknown/automatic" will delete if from the cache
- - a manual framerate in the cache will stop automatic detection of the built-in estimator
- - manually setting the framerate to "unknown" will enable automatic detection of the built-in estimator
- ATTENTION: This is beta software!
- As there are many changes to many parts of ReClock, things might not work right away as expected.
Veranderingen voor v1.8.8.4 - v1.8.8.5
- New: Support for PowerDVD 15
Veranderingen voor v1.8.8.3 Beta - v1.8.8.4
- New: Support for PowerDVD 14
Veranderingen voor v1.8.8.2 Beta - v1.8.8.3 Beta
- Fix: DS automatic framerate detection did not work, if manual framerate settings were used previously
Veranderingen voor v1.8.7.9 - v1.8.8.1 Beta
- New: Better Support for 3D Blu-ray playpack with PowerDVD 10/11/12 & 13
Veranderingen voor v1.8.7.8 - v1.8.7.9
- New: Support for PowerDVD 12
Veranderingen voor v1.8.7.6 - v1.8.7.7
- Fix: Support for ArcSoft TMT 3 and 5
Veranderingen voor v1.8.6.5 Beta - v1.8.7.0
- New: Improved refresh rate detection
- New: Improved TMT3 support
- Some fixes and improvements
Veranderingen voor v1.8.6.4 Beta - v1.8.6.5 Beta
- New: Option "Play media with bitstream audio at original speed"
- New: Added sample VBS script using AnyDVD's SetDisplayFrequency tool.
- Note: With Windows 7, you must use the version which ships with AnyDVD 6.6.3.0 or better!
- Fix: Overflow in buffer calculation with buffer sizes > 600ms and high output sample rates
- Some fixes and improvements
Veranderingen voor v1.8.5.2 - v1.8.5.3 Beta
- 1.8.5.2 was broken. :-(
Veranderingen voor v1.8.4.8 Beta - v1.8.5.0 Beta
- New: Option to specify output sample rate.
- Note: Hardware resampling will always be disabled, if the output sample rate differs from the input sample rate
- New: AC3 encoder can be used with input rates different from 48 kHz
- New: Uninstall added to Windows add/remove programs
- Fix: HD DVD playback with ArcSoft TMT & PowerDVD 7
Veranderingen voor v1.8.4.7 Beta - v1.8.4.8 Beta
- New: Added support for PowerDVD 9
- New: Added support for PowerDVD 8 build 3017
- Change: Removed "Force ReClock to be loaded in PowerDVD" setting.
- Some fixes and improvements
Veranderingen voor v1.8.4.6 Beta - v1.8.4.7 Beta
- Change: Improved speaker output configuration with WASAPI
- Change: Improved speaker mapping
- Change: Built-in estimator is now more accurate with higher frame rates
Veranderingen voor v1.8.4.5 Beta - v1.8.4.6 Beta
- Change: Improved speaker output configuration with WASAPI
- Change: Improved speaker mapping
- Change: Built-in estimator is now more accurate with higher frame rates
Veranderingen voor v1.8.4.2 Beta - v1.8.4.5 Beta
- New: Resampler normalizes to avoid clipping
- New: Built-in estimator detects 48 fps sources
- Some fixes and improvements
- New: Added two debug registry values for yesgrey3 and leeperry:
- ForceSampleRate (in kHz) and BypassResampler (0 or 1), both DWORDs
- Fix: Correct frame rate detection of HD DVDs played back with ArcSoft TMT or PowerDVD 7 (but not latest build)
- Some fixes and improvements
Veranderingen voor v1.8.3.8 Beta - v1.8.3.9 Beta
- New: Added option to select the desired output format for PCM audio (same as input, 16/24/32 bit PCM or 32 bit IEEE float)
- This can be very important for WASAPI / Kernel streaming, as most cards / drivers don't support all formats.
- New: ReClock can automatically change the hardware access method depending on the video renderer (Direct3D for overlay, DirectDraw for anything else).
- New: Added automatic HW access setting in the config tool
- Major enhancements to WASAPI and WAVE playback
- Some fixes and improvements
Veranderingen voor v1.8.3.6 Beta - v1.8.3.8 Beta
- Major enhancements to WASAPI and WAVE playback
- Some fixes and improvements
- New: Replaced Kernel Streaming with WASAPI exclusive (Vista SP1 and up, experimental)
- New: reduced scratching noise when starting wave playback
- Fix: working buffers could be overwritten if media format changed during playback
- Some fixes and improvements
Veranderingen voor v1.8.3.5 Beta - v1.8.3.6 Beta
- New: Updated resampler to libsamplerate 0.1.7
- Change: Reverting to previous speaker configuration works better under Vista.
- Some fixes and improvements
Veranderingen voor v1.8.3.4 Beta - v1.8.3.5 Beta
- New: Added option to set matching speaker configuration for PCM sound using WaveOut or DirectSound.
- This is very useful if you use a 7.1 surround capable HDMI connector for sound playback, e.g. ATI Radeon 4xxxx.
- Works best with DSound output, but WaveOut is supported, too.
- New: DSound / WaveOut devices selection is maintained even if device order changes
- Change: Secondary streams will no longer open any audio device
- Some fixes and improvements
Veranderingen voor v1.8.3.3 Beta - v1.8.3.4 Beta
- New: Improved frame rate detection accuracy from files of the built-in estimator
- Some fixes and improvements
Veranderingen voor v1.8.3.2 Beta - v1.8.3.3 Beta
- Fix: Setting a default frame rate in config.exe disabled the built-in estimator
- Some fixes and improvements
Veranderingen voor v1.8.3.1 Beta - v1.8.3.2 Beta
- New: Setting a manual media frame rate will automatically disable the built in estimators
- Change: Resampler compiler tweaks
- Some fixes and improvements
Veranderingen voor v1.8.3.0 Beta - v1.8.3.1 Beta
- New: Updated resampler
- Change: Latency correction for AC3 encoder
- Change: Expiry date removed
- Fix: 32bit floating point audio from ffdshow did not work
- Some fixes and improvements
Veranderingen voor v1.8.2.7 Beta - v1.8.3.0 Beta
- Change: Some tweaks to hardware detection. It is recommeded to clear your timings cache.
- Fix: GDI and PStrip timings were not deleted when the timings cache was cleared.
- New: Application loading dialog automatically closes after 10 seconds inactivity
- New: Application loading dialog will be visible in full screen applications, e.g. VMC
- New: Installer kills ehrecvr service, otherwise installation could fail
- New: Uninstaller kills ehrecvr service, otherwise uninstall could fail
- Fix: ReClock could hang when loaded from non interactive processes, e.g. VMC receiver service
- Some fixes and improvements
- New: ehrecvr service is now restarted, if it was stopped (see below)
- Change: ehrecvr service isn't brutally killed anymore, it is now stopped via the service manager (if running)
- Change: Expiry date changed to February 2009
- Some fixes and improvements
Veranderingen voor v1.8.2.5 Beta - v1.8.2.7 Beta
- New (experimental): Uses pstrip as a reference (if running), or GDI values (if pstrip isn't used)
- New: Vsync support for NV12
- Fix: Latency correction for AC3 encoder
- Some fixes and improvements
- New: Application loading dialog is shown from a helper process, this fixes problems with some playback software
- Change: Some tweaks to hardware detection. It is recommeded to clear your timings cache.
- Change: Removed delay after display change notification because of undesired side effects
- Change: Removed saving of timings in regular intervals because of undesired side effects
- Fix: In multiple monitor configurations, first notify event could be triggered with the wrong monitor number
- Fix: Logging could have severe impact on performance
- Some fixes and improvements
Veranderingen voor v1.8.2.4 Beta - v1.8.2.5 Beta
- New: Added property sheet to define the keyboard shortcuts in the config tool
- New: Better error handling, if "preferred renderer" setting is changed
- Change: Default settings
- Change: As "Set ReClock as preferred renderer" is a system wide setting, it is now stored in HKLM
- Change: Expiry date changed to January 2009
- Some fixes and improvements
Veranderingen voor v1.8.2.3 Beta - v1.8.2.4 Beta
- Change: STOP events are only triggered from the primary stream
- Fix: "Load always" and "Never load" settings were reversed
- Fix: v1.8.2.3 could be loaded from ReClockHelper and Explorer
- Fix: v1.8.2.1 - 1.8.2.3 had some trouble with STOP events
- Some fixes and improvements
Veranderingen voor v1.8.2.2 Beta - v1.8.2.3 Beta
- New: Redesigned application loading mechansim.
- New: The hotkey to show the properties window (default is CTRL+ALT+SHIFT+R) will toggle the properties window
- New: Option to make ReClock the default renderer is back
- Fix: Crash of PowerDVD
- Some fixes and improvements
Veranderingen voor v1.8.1.9 Beta - v1.8.2.2 Beta
- Fix: Crash of TheaterTek 2.6
- Some fixes and improvements
- Fix: Bug introduced in 1.8.2.0, video renderer pin was not released on stop
- Some fixes and improvements
- New: Added display of DXVA media types in properties
- New: timings are saved in regular intervals, so they aren't lost in case of a player software crash
- Change: More tweaks to hardware detection, timings need to be stable to be accepted
- Change: Display change notification now triggered from separate thread with a short delay
- Change: logfile location will be the user's documents folder
- Change: trigger of RunEvent script delayed until ReClock knows the source dimensions
- Change: Improved Blu-ray & HD DVD playback with ArcSoft TMT
- Change: Thread priorities are no longer altered
- Change: Workaround for problem with ffdshow, video format is checked at regular intervals
- Fix: Vsync correction settings weren't saved
- Fix: Vsync correction was enabled for EVR and Haali if it was enabled for other renderers
- Some fixes and improvements
Veranderingen voor v1.8.1.8 Beta - v1.8.1.9 Beta
- Change: Some tweaks to hardware detection
- Change: Expiry date changed to December 2008
- Change: Method triggering DisplayChange() if RunEvent.vbs returns 0
- Fix: AC3 encoder didn't work correctly, if hardware resampling was previously enabled
- Some fixes and improvements
