Versie historie van SmartDVB
<<Terug naar software beschrijving
Veranderingen voor v0.4.0 - v0.5.0
- 0.5.0 Release contains various fixes to DVB-T2 PLP handling and adds T2-MI support.
- This version contains mostly stability improvements and various bug fixes. If you previously had problems with some devices or other stability problems, it's recommended to try the current 0.5.0 RC version. Some of the main changes are:
- - overall improved stability.
- - bda.dev fixes/improvements should be compatible with more devices now.
- - HEVC compatibility improved, some current HEVC codecs do not seem enough yet and might cause crashes or freezes, if you have problems try the LAV HEVC decoder.
- - improved blindscanner interface
- - better video stability.
- - audio A/B channel selection button to the graphical status bar.
- - scheduler conflict detection and resolving.
- - signal analyzer and monitoring including a constellation diagram.
- - some timeshift changes should make timeshift more stable.
- - Improved MDAPI compatibililty and fixes.
- Improvements and fixes to DVB-T2 PLP handling. Added T2-MI satellite support to the normal scanner and channellists. Improved snapshot support and legacy VMR7 renderer support. New iconset which now also reflects H265 channels. Internal channellist resources moved to images/resources (treeview, scanner and blindscanner). Compact list mode added to graphical channellist. Also various othe fixes incorporated along the lines of previous 0.5.0 test versions.
Veranderingen voor v0.4.0 RC - v0.4.0
- fixed: Scanner update would mark MIS entries with other ID incorrectly lost.
- fixed: RF scan would not take into account other defined LNB's for the current satellite and incorrect LNB limits might be set also when blindscanning.
- fixed: some more RF scan fixes/cosmetic issues.
- fixed: tray icon record state would not always correctly indicate recording on/off.
- fixed: issue where channel icons would not be shown correctly when SID's were shown in the channellist (only for service name based icons).
- modified: some modifications to bda.dev tbs and autodetection code, might detect specific tbs devices (also tbs 6983) better now (thanks to steven).
- fixed: some more fixes to scanner MIS parsing (thanks to alexi).
- fixed: RF Scanner resource strings added (for translations).
- fixed: MIS scan scanner (bda.dev) bug which could select the wrong mis when scanning (thanks once more to alexi).
- fixed: sometimes a scheduled record would use the wrong EIT entry.
- fixed: some cosmetic changes to record name defaults.
- fixed: updated streamreader.dll to 1.2.2.1260
- fixed: some minor fixes to the SmartOSD timeshift button toggles (remote now also should toggle between play/pause).
Veranderingen voor v0.4.0 Beta 2 - v0.4.0 RC
- added: timeout message for scheduled action start (30 seconds default value) added to schedule settings dialog.
- modified: record all audio PID’s for transport stream recordings moved to record settings dialog and should now also be used for normal manual recordings (previously it only worked for scheduled recordings).
- added: chroma subsampling (4:2:0, 4:2:2 etc) to the additional video status, needs testing.
- modified: pressing the ‘play’/’pause’ keys now toggles play/paused state, previously it would remain at the chosen state.
- fixed: timeshift pause did not work correctly (introduced bug). Some modifcations to timeshift code with regards to this.
- modified: some addons interface calls modified (DoDiseqc doesn’t require the full channel data but instead uses the transponder and satellite structures, which is more appropriate not all channel data is needed by this call, this might break existing addons, but since there aren’t many yet i figured it wouldn’t be much of a problem. If you have build an addon you’ll need to rebuild with the current addon example headers to be sure)
- modified: some setup changes. If you had undefined problems with upgrades previously please try again.
- improved: osd timeshift button states (ff/play/pause didn’t always update button state correctly).
- added: end time to add schedule task dialog (by requests).
- improved: smartosd transparency slider settings is more verbose now (seemed unclear to some)
- added: EIT event description on the main epg pane is now also shown in the edit field.
- modified: by default dvb-t offset settings are not used (too many users seem to have issues with this). Added an option to the scanner dialog to specifically enable offset addition to the currently scanned dvb-t frequency.
- improved: EPG ampersand “&” would be incorrectly translated to underscore at some places.
- added: blindscanner option to disable retries when no data is received.
- added: option to diseqc settings to not show ‘positioner moving …’ message when moving a positioner/rotor.
- fixed: scanner bugfix where MIS values would not be shown correctly with a sort selected/active.
- improved: some modifications to blindscan.dev to enable it to tune dvb-t/c (dvb-t tested).
- fixed: bug which could occasionally cause a crash when using the diseqc console.
- added: basic RF scanner. Only works with streamreader.dll supported devices so don’t try this otherwise won’t work.
- Might be removed for final version if it causes too many issues. Added for testing/feedback.
- updated: streamreader.dll to current 1.2.0.1202 version.
Veranderingen voor v0.4.0 Beta 1 - v0.4.0 Beta 2
- added: smartexec /channel option saves currently selected channel (satid,nid,tid,sid) to channel.dat in the settings folder.
- fixed: lag issue which could occur with skystar devices (skystar.dev).
- fixed: bda.dev crash which could occur when switching to/from direct tune mode.
- fixed: skystar HD Express should now also work with skystar WDM device (skystar.dev), should be a better option for owners of such devices compared to the buggy bda implementation technisat provides.
- fixed: transcode parameters were not saved correct/used at the transcode settings dialog.
- fixed: video status bar would not update EPG progress/textual data correctly at all times, should work better now.
- fixed: skystar.dev signal stats were not being shown correct (quality/level were shown as being the same).
- fixed: edit filter should be maintained between channel tab switches.
- added: HTTP stream option to stream radio station with MP3. (TV stations should also send the audio only through this http url).
- added: basic transcode profile settings to allow for easier change/selected of different streaming/recording parameter sets. Seemed like a necessity to add this to the current external ffmpeg transcode setup. Profiles are saved to settings/transcode.ini
- fixed: scan update dialog lost channels are now sorted by frequency.
- fixed: some issues with transport stream transcoded recordings (mp4/mkv).
- added: remote ch# selection should also move epg to the selected remote tab channel.
- fixed: channel list tv filter would not be retained across application instances.
- fixed: adding a blindscan range now uses correct c-band defaults
- fixed: client mode now also takes extra buffering into account when receiving streams (if set it’s used for client side receive buffering).
- fixed: some transcode profile interface inconsistencies.
- added: ability to hide video status (main menu > view)
- added: optional extra video status line showing video/audio type and simple record progress.
- added: video process to connection settings dialog. This allows you to enter a filter like for example ‘ffdshow raw filter’ to process video.
- added: alternate video decoder, based on name selection for now, if you have other suggestions please let me know. You can use this to for example select a different decoder for HD compared to H.264 (by entering a name like ‘ HD’ or alike).
- added: seperate h.264 ffmpeg record transcode command lines. So you’re able to differentiate between then when recording, on slower systems you H264 transcoding speed is increased by using preset -superfast where possible. This might decrease recording quality in such cases though, remove it again if you don’t have issues with the efficiency of these transcoding on your system. Please note that slower systems might simply have problems automagically transcoding some recording types, if you’re system simply isn’t efficient enough for ffmpeg to transcode in real-time this might be unsolvable besides a quicker cpu.
- fixed: HTTP streaming seemed to fail on some XP systems, added HTTP option to optimize http streaming which might allow such XP systems to stream correctly when enabled.
- modified: HTTP internal caching reworked somewhat to try to make it more stable under various network conditions.
- added: renderless video renderer.
- modified: some changes to bdas.dev due to reports, some people seem to have some weird exceptions there sometimes. If you experience worse/sluggish video or lockups at exit please let me know, i might need to revert these changes if it’s not for the better.
- added: option to schedule task exit to close the dvb device (experimental might be unstable, /STOPDEV parameter added to smartexec.exe for this purpose).
- fixed: some problems with audio process filter being added twice under some settings situations.
- fixed: some additional bug report fixes/modifications.
- added: basic initial HEVC support. Current known codecs which support HEVC are lentoid/LAV/latest cyberlink. Please note that some of these codecs are still quite unstable and could result in application exceptions related to these codecs. HEVC is not implemented for PIP atm (seemed like overkill with just 2-4 available and unstable satellite HEVC streams)
- fixed: main app status bar did not remain hidden if so requested on restart.
Veranderingen voor v0.3.5 - v0.4.0 Beta 1
- support for multiple LNB’s on a per satellite basis, based on frequency selection. You should be able to define more than 1 lnb with the satellite settings dialog (main menu ‘add/edit frequencies > settings’) for a specific satellite. This might be most useful for north american (c-band) users, so please let me know if this works as advertised for you since I’m not able to test this very thorough.
- MadVR support. MadVR will show up as a selectable renderer only if installed. Please note that you require a strong system setup and 3d graphics video card to make use of MadVR, so don’t go trying this on older systems please.
- left/right stereo Audio spectrum.
- client/server mode with HTTP or UDP streaming, including transcoding with an external transcoder like ffmpeg.exe (latter included in the installer archive). Requires testing.
- transport stream records transcoding, allowing you to save the recording to mp4/wmv/mkv/avi/mpg through ffmpeg transcoding (note mp4 transcoding will not work on XP systems, this is a known issue atm).
- parental lock settings.
- various scanner (normal scanner not blindscanner) enhancements and modifications (changes detection when updating, more frequencly list sorting etc), requires testing.
- basic stream analyzer.
- providerid’s should now be detected, where possible.
- and more
- as always lots of bug fixes and corrections/modifications.
Veranderingen voor v0.3.5 Release test - v0.3.5
- fixed: smartosd channel list (floating/fullscreen) seemed broken.
- fixed: ms dtv-dvd video should connect better now (some other codecs like ffdshow might have less issues with no connection error messages sometimes too).
Veranderingen voor v0.3.0 RC - v0.3.0
- corrected: some graph timeshift issues.
- corrected: some issues with smartosd up/down remote/kb keys which did not navigate station list. Also 'ok' should now tune current selected station at those station lists.
- corrected: scanner sync update from satfeeds failed.
Veranderingen voor v0.3.0 Beta 3 - v0.3.0 RC
- corrected: issue with open db's at appdata folder path.
- corrected: scan issue when update stations.
- corrected: skystar issue with appdata path once more.
- corrected: some issue with wrong processed dvb subtitles at some stations.
- corrected: epg issue with north america (windowed epg would not show correct all the time).
- also left/right with smartosd station data now also moves through simple epg/stations, to
- preview mini osd station epg without tune with remote (enter should then tune station if so required etc).
- add: NA modulations (DSS QPSK)
- (Digicipher II Combo)
- (Digicipher II Split (I))
- (Digicipher II Split (Q))
- (Digicipher II Offset QPSK)
- to app, bda.dev implementation (should operate with genpix bda devices untested).
- add: persian iso support to epg (not tested)
- corrected: bda.dev BDA_MOD_32APSK modulation issue which probably didn't process this modulation correct (untested)
- add: www.smartdvb.net website hyperlink to about dialog.
- corrected: some exceptions/problems corrections.
- add: above mentioned NA modulations to blindscanner/blindscan.dev (untested).
- corrected: fastsatfinder syncs did not show 8psk modulations correct.
- corrected: possible issue with diseqc rotor console step east/west at seconds mode.
- corrected: again more corrected exceptions/issues due to reports i hope.
- done: some general app robustization.
- corrected: mpeg radio/audio records seemed broken, should operate again.
- done: upgraded report module to current one.
- add: keep display on to general settings (should override power save options which might turn display
- off while video available).
- corrected: dcII muxes process correction (video/radio PID's did not get detected correct like video/radio
- stations). No dss streams processing this might be enabled somehow at future.
- Note genpix.dev for now does not operate with dcII modulations, please use bda.dev (florian) which
- requires the genpix bda driver to be installed.
- add: new tsb interfaces to bda.dev (Florian). Tested with tbs5925 seems auto-detect code did not operate
- correct for this tbs device (please let me know if new tbs interfaces r ok for ur tbs device too only
- tested with tbs 5925 and commited switch).
- corrected: most new strings moved to resources to allow for translations. If you attempt a translation but still
- miss some localized strings please let me know.
- add: smartosd option to disable transparency, if you have cpu/video issues (especially with smartosd epg)
- try this option (at future release this might be made configurable per osd element).
- add: SmartOSD program nfo now also shown when main windowed epg clicked. Also click at screen/image while
- p/i visible should hide p/i.
- add: visibility option to smartosd settings to allow for hide/show of main/windowed popup osd elements.
- altered: send diseqc at each frequency alteration's now enabled by default.
- altered: bda.dev module at new install now select direct tune mode for prof7301, seems for some users
- default bda tune does not operate correct with this device, direct mode seems to operate better.
- add: simple anti-repeat to remote options.
- corrected: no-signal process should operate better now.
Veranderingen voor v0.3.0 Beta 2 - v0.3.0 Beta 3
- corrected: enigma style logo's were not shown correct everywhere (remote etc).
- corrected: some update station logic.
- add: addon section filter addition/fixes.
- add: positioner move osd msg.
- corrected: timeshift ff/rw/movement altered, might be slower now but should b more
- compatible with more codecs (LAV? needs tb looked at).
- add: windows lock detect (Win Key + L)
- add: option to station list settings to left align station names (instead of default center)
- corrected: bugfixes.
- corrected: again some skystar.dev issues, hope now ss module's ok again.
- corrected: graphical timeshift OSD didn't operate correctly above 4gb timeshift size.
- corrected: scheduler exception.
- add: updated blindscan to current streamreader.dll release.
- corrected: more bugfixes
- corrected: udp multicast alteration to use real multicast (local) addresses
- (eg. 225.6.7.8, at VLC you should receive udp stream like udp://@225.6.7.8:8888
- where 8888 is the chosen port, not tested).
- add: time to live (ttl) to udp multicast dialog.
- corrected: dish hidden stations scan seemed to be broken, should operate again.
- add: lnb power off force method which might operate for some devices with no direct lnb power off
- method (technotrend etc, untested, please let me know if lnb power off operates correct/falsely with u)
- add: menu options 'tools > send application report' also possible to use CTRL-ALT-R to create application
- report to send directly to smartdvb author. Useful for debug methods or automatic send of logs etc.
- corrected: statup up/down keyboard/remote shortcuts operated odd when smartosd epg enabled, should be somewhat
- better now (legacy nd custom list).
- corrected: NIT scan got broken, should operate again.
- add: site fastsatfinder to scanner sync options.
- altered: some alterations to blindscan.dev which might improve compatibility, if you had issues before with
- prof 7301 please try again.
Veranderingen voor v0.3.0 Beta 1 - v0.3.0 Beta 2
- fix: some iso bug fix wrt return being shown like '?'.
- fix: alteration wrt windows 8 window mode switch (fullscreen/main/windowed).
- fix: some altertions to try to get polish codepages to operate ok by default.
- fix: custom station list icons r not scaled now but drawn to actual bitmap sizes so you r able replace them with smaller/larger ones.
- fix: custom station list fixes wrt small fonts which were not shown correct.
- corrected: logos able to be transparent now.
- add: epg item font select to epg options.
- add: select of specific device per frequency list (switch for now). This allows selection of different device per frequency list (useful
- for sat mainly).
- corrected: various bufixes (skystar2 device seemed to fail sometimes, probably related to some data trying to be written at local/appdata
- so if people experience skystar2 issues still, try to install app at 'program files' for now)
- cor: various bugfixes.
- add: double-click to select station with new custom list should operate now.
- add: basic skin option wrt to osd/custom list images to smartosd options (needs to be extended at future but for now only images).
- Settings/skins.ini is used to configure skin name/folder (sub folder of images) 'nd author.
- add: support for picon style enigma icons included transparency (place the icons at logos subfolder with sat id, eg logos\192\, logos\130)
- corrected: some corrections to report processing (not everything seemed processed correctly, more logs added).
- corrected: acamd exception should b corrected now.
- add: section filter to addons.
- corrected: timeshift path option did not operate correct (no update).
- corrected: dish scan did not operate (not tested).
- add: max logo height for custom station list to station list properties.
- corrected: some alterations to setup wrt upgrades.
