Versie historie van madVR
<<Terug naar software beschrijving
Veranderingen voor v0.92.15 - v0.92.17
- * modified/simplified HDR tone mapping settings page
- * small HDR tone mapping saturation improvement
- * OSD now also shows the measured luminance of the current frame (in addition to the average)
- * fixed: render & present queues didn't always fill in Windows 10 build 1803
- * fixed: using XySubFilter sometimes resulted in black screen / freeze
- * fixed: using HDR "processing" resulted in dark and red-ish image
- * fixed: using BT.601/709 gamma curve with HDR tone mapping produced gray-ish image
- * fixed: settings dialog sometimes crashed on display mode / custom mode tab
Veranderingen voor v0.92.14 - v0.92.15
- * HDR: improved overall tone mapping quality
- * HDR: added "color tweaks for fire & explosions" option
- * HDR: "restore details in compressed highlights" renamed to "highlight recovery"
- * HDR: improved "highlight recovery" algo, now uses/requires DirectCompute
- * HDR: added trade quality option "compromise on tone & gamut mapping accuracy"
- * HDR: maxCLL is now used (if valid)
- * HDR: added "hdrVideoPeak" profile variable
- * HDR: added (limited) support for HDR OSD bitmaps
- * added "report BT.2020 to display" calibration option
- * added true GPU mode info (color format, bitdepth & dynamic range) to OSD (Nvidia only)
- * fixed: low latency mode could result in judder/stuttering
- * fixed: OSD API sometimes drew stuff in the wrong position
- * fixed: madHcNet32/64.dll produced DCI-P3 3DLUTs with incorrect header
- * added undocumented "ShowHdrMode" empty file/folder option
Veranderingen voor v0.92.12 - v0.92.14
- * fixed: activated HDR option "restore details in compressed highlights" broke SDR playback
- madVR v0.92.13
- * added 2 new RCA quality levels, with NGU fusion support
- * if "activate RCA only if it comes for free" is active, NGU quality level isn't modified, anymore
- * improved "preserve hue" tone mapping quality
- * added "dynamic" mode for "luminance vs saturation reduction" option
- * added "dumb" tone mapping algo, optionally with color correction
- * added support for Arve custom tone mapping curves
- * added "hdrOutput" information field
Veranderingen voor v0.92.11 - v0.92.12
- * added option "use reduce compression artifacts only if it comes for free"
- * added experimental "diffuse white" HDR option (mainly for projector owners)
- * improved non-hue-preserving HDR tone mapping
- * removed low quality hue preserving HDR tone mapping
- * HDR option "fix too bright & saturated pixels" is now always available
- * display peak nits edit control now accepts down to 80 Nits (formerly 120 Nits)
- * added 3dlut information to OSD (only if active)
- * fixed: RCA wasn't always run as part of NGU, even though it should
- * fixed: little OSD scaling info text glitch
- * fixed: #228: deintFps was not 24 for 720p60 decimated 6:4 cadence content (forced film)
- * fixed: #394: madvr OSD didn't resize properly when screen masking options are used
Veranderingen voor v0.92.10 - v0.92.11
- * added 2 new lower "remove compression artifacts" strengths
- * slightly improved "remove compression artifacts" quality at lower strengths
- * "remove compression artifacts" now always runs as part of NGU (if possible)
- * display bitdepth now defaults to new "auto" setting (read from EDID)
- * extended "if there are big black bars, reduce bar size" option range
- * render target display is now shown in bold in the settings dialog
- * added support for "execute command line on profile switch"
- * when OS "HDR and Advanced Color" switch is active, FSE mode is disabled
- * removed "exclusive" / "windowed" mode OSD notification
- * added "(OS HDR)" vs "(NV HDR)" vs "(AMD HDR)" OSD information
- * added downscaling "LL" (Linear Light) information to OSD
- * added keyboard shortcut for opening settings dialog (default Ctrl+S)
- * added keyboard shortcut for toggling seekbar on/off
- * added keyboard shortcut for showing seekbar for 5 seconds
- * added keyboard shortcut for toggling debanding on/off vs strength
- * added file tag "detectBlackBars=on|off" or "blackBarDetection=on|off"
- * added file tag "hdr=on|off" or "transfer=hdr|sdr|2084|709"
- * added "battery" profile variable
- * added "fullscreen" profile variable, can be exclusive or windowed
- * renamed "fseMode" profile variable to "exclusive" ("fseMode" still works)
- * fixed: "display" profile variable didn't work properly
- * fixed: little "let madVR decide" chroma quadrupling bug
- * fixed: screenshots were distorted when using "crop black bars"
- * fixed: screenshots in paused state sometimes crashed madVR
- * fixed #320: make seeking to start of movie easier with FSE mode seek bar
- * fixed #336: madHcCtrl: 3DLUT file path is evaluated for remote instance
- * fixed #406: typing in "devices" profiles could jump to other pages
- * fixed #481: distorted colors with Y416 input and DXVA processing
- * added workaround for subtitle renderer crashes (XySubFilter, AssFilterMod)
- * added workaround for PotPlayer OSD render crashes
Veranderingen voor v0.92.9 - v0.92.10
- * algo "remove compression artifacts" can now be run as part of NGU
- * reverted NGU Sharp back to gamma light -> slightly better anti-aliasing
- * removed NNEDI3 (based on user feedback)
- * ever so slightly improved HDR behaviour
- * default value for HDR -> SDR conversion is now set to "200 nits"
- * default value for "enable automatic fullscreen exclusive mode" is now "off"
- * default value for "use d3d11 for presentation" is now "on"
- * fixed: using multiple madVR instances at the same time could sometimes fail
Veranderingen voor v0.92.8 - v0.92.9
- * added "reduce compression artifacts" quality option "high"
Veranderingen voor v0.92.7 - v0.92.8
- * added 3 new "reduce compression artifacts" strength steps between 1-4
- * removed deblock option "don't reduce texture detail", wasn't useful
- * replaced old "reduce random noise" strengths 1+2 with a new strength 1
- * fixed: key for increasing "reduce random noise" strength stopped at 5
Veranderingen voor v0.92.5 - v0.92.7
- * added experimental deblock option "don't reduce texture detail"
- * added experimental AdaptiveSharpen option "linear light"
- * added new lowest "reduce compression artifacts" strength
- * revisited "reduce random noise" strength levels, now from 1-12
- * updated AdaptiveSharpen to latest igv version
Veranderingen voor v0.92.4 - v0.92.5
- * added new algorithm "reduce compression artifacts"
- * added new algorithm "reduce random noise"
- * added file name tag and keyboard shortcut support for new algorithms
- * switched to igv's AdaptiveSharpen variant
- * custom mode optimization is now available for modes not created with madVR
- * fixed: mode optimization didn't work for Nvidia (introduced in v0.92.4)
- * fixed: ProgDVB: DXVA deinterlacing didn't activate after channel switch
- * fixed: potential freeze when freeing madVR instance
- * fixed: playback trouble after switching video files (introduced in v0.92)
- * fixed: screenshot memory leak
Veranderingen voor v0.92.3 - v0.92.4
- * fixed: HDR metadata transport didn't always work with AMD GPUs
- * fixed: potential crash issue introduced in v0.92.0
- * fixed: possible rendering slowdown issue introduced in v0.92.2
- * fixed: custom mode warning windows sometimes appeared in background
- * added logging to help find why custom mode measurements aren't recorded
- * screenshotting now uses NGU High instead of Very High
- * screenshotting now has a 5 second timeout instead of 2 seconds
- * slightly modified user interface for Nvidia custom mode creation
Veranderingen voor v0.92.2 - v0.92.3
- * added extended screenshot functionality, new settings page etc
- * added "IMadVRFrameGrabber" interface for media player developers
- * added HDR support to madTPG
- * added (limited) support for cropping through the DirectShow pin info
- * slightly improved super-xbr weights
- * fixed: settings dialog (madHcCtrl) could crash for AMD users
- * fixed: Nvidia FSE HDR passthrough tweak stopped working in v0.92.2
- * fixed: D3D11 DXVA decoding: NNEDI3 chroma upscaling crashed
- * fixed: D3D11 DXVA decoding: sometimes froze for 5 seconds
- * fixed: using FSE seekbar in paused state could freeze media player
- * fixed: custom modes of secondary monitor showed primary monitor data
- * fixed: madTPG: mouse cursor could confuse the measurements
- * odd horizontal porches are punished with a higher compatibility hit now
Veranderingen voor v0.92.0 - v0.92.2
- * fixed: possible crash when stopping playback or freeing the madVR instance
- * fixed: DXVA2 decoding+downscaling produced wrong colors with HDR content
- * fixed: D3D11 DXVA decoding: crash when moving window to another monitor
- * fixed: D3D11 DXVA decoding: green screen with DX10 GPUs
- * fixed: D3D11 DXVA decoding: problems if video unexpectedly changes size
- * fixed: D3D11 DXVA decoding: detection for bad HDR metadata wasn't working
- * fixed: custom modes tab didn't show for AVR devices
- * fixed: custom modes tab didn't show when display modes was in a profile
- * fixed: D3D11 FSE mode was sometimes limited to 8bit instead of 10bit
- * fixed: HDR "let madVR decide" setting misbehaved for Intel GPUs
- * fixed: HDR metadata sent to display wasn't always correct
- * fixed: "HDR" profile bool was not set if HDR metadata was bad/unknown
- * fixed: some settings windows appeared behind a "always on top" media player
- * added support for sending MaxCLL/FALL HDR metadata (if available) to the TV
- * added "enable nvidia 3d.reg" to enable 3D playback with newer Nvidia drivers
- * if video HDR metadata is bad/missing, default HDR metadata is sent to TV now
- * when custom mode is deleted, measurements are now also deleted
- * Nvidia "try custom mode" timeout increased to 30 seconds
Veranderingen voor v0.91.11 - v0.92.0
- * added new "display modes" -> "custom modes" settings tab
- * added support for native D3D11 DXVA hardware decoding (needs nightly LAV)
- * added support for outputting 10bit in fullscreen windowed mode (win10)
- * added optimized "let madVR decide" HDR configuration option
- * added support for AMD's private HDR switching API
- * added workaround for make Nvidia's private HDR switching API work better
- * added full-size EDID block reading (256 bytes instead of just 128)
- * added extended EDID parsing
- * improved frame drop/repeat estimates for xx/1.001 hz modes
- * fixed: deinterlacing of P010 software decoded videos was broken
Veranderingen voor v0.91.10 - v0.91.11
- * fixed: HDR metadata via Nvidia's private API was broken in 64bit
- * added workaround for driver bug in Nvidia's private HDR API
- * improved Windows 10 HDR metadata support
- * D3D11 windowed mode now supports 10bit, if "HDR and Advanced Color" is on
- * improved AMD native 10bit DXVA decoding; drivers are still broken, though
- * downscaling after doubling now uses relaxed AR only for NGU Sharp + Standard
Veranderingen voor v0.91.9 - v0.91.10
- * improved Windows 10 HDR metadata support
- * added new option "hack Direct3D to make 24.000Hz and 60.000Hz work"
- * performance improvement with "trust DXVA" + "use D3D11 for presentation"
- * fixed: Intel GPU driver flickering bug with "use D3D11 for presentation"
- * fixed: madVR(64).ax files were larger than necessary
- * Intel: 10bit DXVA surfaces are now converted to 10bit RGB (instead of 8bit)
Veranderingen voor v0.91.8 - v0.91.9
- * added support for sending HDR metadata via Nvidia's private API
- * added support for sending HDR metadata via win10 (not tested yet)
- * fixed: processing (not converting) HDR was not handling gamut correctly
Veranderingen voor v0.91.7 - v0.91.8
- * NGU Sharp now targets middle ground between gamma and linear light
- * added NGU Standard + Soft algorithms, with direct quadrupling support
- * added true "very high" quality mode for direct quadrupling
- * modified "add grain" to produce similar output when using direct quad
- * fixed: Y416 input was handled incorrectly
Veranderingen voor v0.91.5 - v0.91.7
- * fixed: doubling twice with "normal" chroma quality resulted in weird colors
- * fixed: "downscaling after doubling" dropbox was missing an item
- v0.91.6
- * added NGU Anti-Alias algorithm, intended as a potential NNEDI3 replacement
- * completely redesigned image upscaling settings page once more
- * downscaling after doubling now uses relaxed AR (instead of strict)
- * increased AdaptiveSharpen + LumaSharpen upper limits
- * fixed: up & downscaling anti-ringing checkbox was sometimes disabled
- * fixed: 3D subtitle depth was incorrect for movies with swapped eyes
Veranderingen voor v0.91.3 - v0.91.5
- added direct 4x NGU upscalers
Veranderingen voor v0.90.23 - v0.90.24
- * HDR: improved tone mapping algorithm
- * HDR: added gamut mapping compression (instead of clipping)
- * HDR: slightly improved luminance vs saturation reduction formula
- * HDR: added options to use an external HDR tone mapping 3dlut
- * HDR: added option to do HDR processing, but still output PQ
- * fixed: measuring HDR luminance + NNEDI3 chroma upscaling sometimes crashed
- * compiled OpenCL kernels are now stored separately for 32bit and 64bit
- * when using the "ShowRenderSteps" tweak, a smaller OSD font is used now
Veranderingen voor v0.90.22 - v0.90.23
- * updated AdaptiveSharpen to version 2016-07-10
- * custom output levels can now be adjusted in 0.25 steps
- * HDR: added option to define how to handle too bright & saturated pixels
- * fixed: HDR luminance measurements + chroma SuperRes produced green screen
- * fixed: #420: chroma was doubled despite being below scaling factor threshold
Veranderingen voor v0.90.21 - v0.90.22
- * added Shiandow's new (Cross) Bilateral chroma upscaler version
- * optimized black bar detection performance, should now also work for 4K 60p
- * removed Anti-Bloating for SuperRes, because it didn't really help
- * fixed: mixed x/y SSIM2D downscaling produced green screen
- * fixed: doubling decision was based on window size instead of video size
- * fixed: HDR peak luminance of 120/180 nits negatively affected SDR playback
- * fixed: HDR "measure each frame's peak luminance" froze with Intel/NVidia
- * fixed: HDR compressed/clipped highlights were ever so slightly too saturated
- * HDR: disabled HDR processing now disables 3dlut, color and gamma tweaks
- * HDR: improved quality for 120 and 180 nits
- * HDR: file "DisableHdrBrightnessTweak" disables 1xx nits special handling
Veranderingen voor v0.90.0 - v0.90.21
- * HDR: pixels between 0-100 nits are now left untouched (if possible)
- * HDR: improved desaturation algorithms to reduce hue shift even further
- * HDR: added option to choose between clipping and tone mapping
- * HDR: added option for hue preservation quality
- * HDR: added option to restore detail in compressed regions
- * HDR: added option to measure each video frame's peak luminance
- * HDR: added option to completely disable HDR processing
- * HDR: added workaround for files with invalid metadata
- * fixed: supersampling + 2D SSIM sometimes produced "green" video
Veranderingen voor v0.90.17 - v0.90.18
- * added new deringing algorithm
- * added dering key shortcut and file name tag ("dering(ing)=on/off/half/full")
- * fixed: upscaling refinement wasn't always active when doing supersampling
- * fixed: Jinc upscaling was replaced by Lanczos3 when upscaling in only X or Y
- * fixed: some graphical corruption when combining NNEDI3 + SSIM2D + Anti-Bloat
- * fixed: image was too bright with linear light down- and sigmoidal upscaling
- * fixed: sometimes HDR SMPTE 2086 metadata got lost
Veranderingen voor v0.90.16 - v0.90.17
- * added a couple of image doubling super-xbr anti-bloating options
- * fixed: "relaxed" vs "strict" option wasn't properly hidden for upscaling
Veranderingen voor v0.90.15 - v0.90.16
- * added adjustable anti-bloating filter for sharpening
- * added adjustable anti-bloating filter for SSIM downscaling
- * added adjustable anti-bloating filter for SuperRes
- * added anti-ringing filter for SuperRes
- * added Hyllian's super-xbr anti-ringing (for image doubling)
- * reworked super-xbr chroma upscaling anti-ringing algorithms
- * improved sharpen anti-ringing filter
- * sharpen anti-ringing filter now also includes AdaptiveSharpen
- * changed SSIM anti-ringing method
- * added "relaxed" vs "strict (soft)" option for downscale anti-ringing
- * "crispen edges" now tries to avoid amplifying grain & noise
- * reduced some "crispen edges" aliasing problems
- * added separate image doubling supersampling option
- * added trade quality option "scale chroma separately if it saves performance"
- * increased AdaptiveSharpen max value from 1.5 to 3.0
- * increased "thin edges" max value from 4.0 to 8.0
- * previously optional DX11 "alternative glitch handling mode" is now always on
- * multiple profile groups can now share the same keyboard shortcut
- * double clicking tray icon now opens "best" settings instead of always local
- * fixed: Jinc/SSIM 2D downscaling was sometimes activated when not needed
- * fixed: 4-taps Spline was broken
- * fixed: some problems with 3D side-by-side and line/column alternative
- * fixed: 10bit content could make DXVA scaling fail
- * fixed: bitmap subtitles were not always moved up when cropping black bars
- * fixed: when downscaling, some chroma algos were used although they shouldn't
- * fixed: sometimes media player froze during DVD playback
- * fixed: source black/white adjustments + gamma processing: wrong order
- * fixed: rare shutdown crash when using native DXVA decoding
- * fixed: OSD bug when playing BT.709 HDR content
Veranderingen voor v0.90.11 - v0.90.12
- * fixed: OSD and subtitles went black when using error diffusion
- * fixed: subtitle depth was always set to 4, even for 2D subtitles
Veranderingen voor v0.90.0 - v0.90.11
- * added support for receiving 3D subtitle depth from splitter
- * added support for rendering subtitles and OSD at a specific 3D depth
- * added ISubRenderCallback4 interface to allow ISR to render 3D subtitles
- * downscaling anti-ringing filter is now much more agressive
- * removed integrated anti-ringing filter from "crispen/sharpen edges"
- * added optional external anti-ringing filter for ringing sharpening algos
- * re-added experimental "linear light" option for "crispen edges"
- * image doubling can now be forced on (if no scaling is done otherwise)
- * added 25%, 50%, 75%, 100% strength option to SSIM downscaling
- * fixed: MPC-HC ISR subtitles didn't work in 3D mode
- * fixed: 3D rendering with Bilinear downscaling wasn't really using Bilinear
Veranderingen voor v0.90.9 - v0.90.10
- * added support for Jinc (AR) downscaling
- * added support for SSIM 1D vs. 2D downscaling
- * added a couple of SSIM performance improvements
- * added support for reading 3D eye order information from splitter/decoder
- * fixed: bitmap subtitles (DVD/Blu-Ray) were not always properly downscaled
- * fixed: DXVA deint + SSIM downscaling could result in bad image quality
- * fixed: memory leak (maybe)
Veranderingen voor v0.90.8 - v0.90.9
- * slightly improved SSIM quality (even stronger detail reconstruction)
- * removed SSimDetailed option, now SSimClean is always used
- * removed "use 1.6 gamma instead of 2.2" option
- * fixed: moving media player to another monitor resulted in paused playback
- * fixed: rendering eventually left some D3D interfaces open
- * fixed: madVR shutdown memory leak
- * fixed: some problems with live TV (detected by DVBViewer devs)
- * fixed: 1080p23 was forced even when not using "auto" (frame packing)
Veranderingen voor v0.90.7 - v0.90.8
- * fixed: downscaling "a lot" on some GPUs/drivers produced nearest neighbor
- * fixed: NNEDI3 doubling + SSIM downscaling could result in green tint
Veranderingen voor v0.90.6 - v0.90.7
- * fixed: banding when using linear light downscaling (introduced in v0.90.5)
- * fixed: some problems when moving madVR to a different monitor
- * fixed: OSD display bug when using different scaling algos for X and Y
Veranderingen voor v0.90.4 - v0.90.6
- * fixed: linear light SuperRes processing got broken in v0.90.5
- * fixed: SuperRes chroma processing was broken in certain situations
Veranderingen voor v0.90.3 - v0.90.4
- * added Bicubic "sharpness: 150" option (useful for downscaling)
- * added Shiandow's SSIM downscaling algorithm
- * optimized Direct3D initialization order for 3D playback
- * rendering no longer waits for OpenCL or DirectCompute to initialize
- * fixed: AMD x64 GPU driver crash (added a workaround, not my fault!)
- * fixed: interlaced output resulted in wrong refresh rate detected
- * fixed: switching windowed -> FSE with D3D11 could result in black screen
- * fixed: screenshots with "use a separate device for DXVA" sometimes failed
- * fixed: incoming 4:2:2 content with odd video resolution crashed
- * fixed: minor timing issue with D3D11 presentation
- * fixed: OSD stopped working when no new frames came from decoder
- * fixed: one potential settings dialog crash
- * added IMadVRCommand::SendCommandDouble("keepLastFrameOnStop")
- * added IMadVRCommand::SendCommandDouble("emptyQueue")
- * last video frame is now remembered for 2 seconds when stopping graph
- * added "EC_VIDEO_SIZE_CHANGED" information to "mvrInterfaces.h"
Veranderingen voor v0.90.2 - v0.90.3
- * frame packed 3D: display mode is now always changed to 1080p23
- * frame packed 3D: smooth motion FRC is now always off
- * 3D: side-by-side quality is improved (proper scaling instead of Bilinear)
- * 3D: added top-and-bottom, line alternative and column alternative modes
- * 3D: added "swap left / right eye" option
- * profile rules: added "3D" boolean variable
- * profile rules: added "+", "-", "*", "/", ":" math support
- * profile rules: number fields can now be used on both equation sides
Veranderingen voor v0.90.1 - v0.90.2
- * fixed: directly entering 3D fullscreen exclusive mode failed
- * fixed: trying to do 10bit playback stopped 3D from working
- * fixed: D3D11 presentation sometimes got stuck (minimized, Aero Peak etc)
- * fixed: LAV reporting double frame rate was ignored
- * added 3D content information to OSD, e.g. "NV12, 8bit, 4:2:0 (3D)"
- * added 3D presentation information to OSD, e.g. "D3D11 exclusive (3D)"
- * 3D playback now always uses 1080p23 display mode
- * disabled refresh rate fix logic for 3D presentation (just to be safe)
Veranderingen voor v0.89.19 - v0.90.1
- * fixed: DXVA processing was broken on some GPUs
- * fixed: DXVA upscaling option was grayed out
- * fixed: chroma SuperRes fracked up HDR colors
- * fixed: LAV reporting YCgCo was misinterpreted by madVR
- * fixed: "Reconstruction" was reported by the OSD to be "Jinc"
- madVR v0.90.0
- * added support for 3D decoders (IMediaSample3D)
- * added support for 3D frame packed playback via HDMI 1.4+ (requires win8.1+)
- * added support for native 10bit 4:2:0 DXVA decoding (+ scaling)
- * added "Reconstruction" chroma upsampling algorithm (replaces NEDI option)
- * updated SuperRes algorithm for chroma upscaling
- * replaced luma upscaling "linear light" with "sigmoidal light" option
- * sharpen edges is now ever so slightly brighter than before
- * updated AdaptiveSharpen to version 2016-01-07
- * fixed: D3D11 presentation crashed NVidia driver if 3D vision was enabled
- * if DCI-P3 3dlut isn't selected, BT.2020 3dlut is used instead (if available)
- * if BT.2020 3dlut isn't selected, DCI-P3 3dlut is used instead (if available)
Veranderingen voor v0.89.18 - v0.89.19
- * added support for display peak luminance values of 265, 180 and 120 nits
- * HDR: gamut mapping is now always on, even if calibration control is disabled
- * fixed: DVD/Blu-Ray subs were positioned incorrectly when using DXVA scaling
- * fixed: DVD aspect ratio wasn't always shown correctly when using MPC-HC
- * fixed: gamma processing and brightness control didn't work for HDR content
- * fixed: DXVA decoding + deint -> refresh rate sometimes didn't switch
- * repeated frames are displayed (again) when smooth motion FRC is enabled
Veranderingen voor v0.89.17 - v0.89.18
- * added tone mapping support for HDR content
- * added gamut mapping support for HDR BT.2020/DCI-P3 content
- * added support for SMPTE 2084 transfer function decoding
- * added support for receiving HDR metadata from LAV Video Decoder
- * added "maximum display luminance" option to display properties page
- * added "HDR" profile variable
- * SuperRes now supports being run after every ~2x upscaling step (again)
- * improved JVC projector ip control connection reliability
Veranderingen voor v0.89.16 - v0.89.17
- * significant speedups for "sharpen edges" and "thin edges" algos
- * small quality change (hopefully improvement?) for "thin edges"
- * fixed: repeated frames were reported although smooth motion FRC was on
Veranderingen voor v0.89.13 - v0.89.16
- * fixed: occasional aspect ratio problems (introduced in v0.89.14)
- * fixed: "refine only once" doesn't affect SuperRes, anymore
- * fixed: DXVA decoding + deint -> refresh rate sometimes didn't switch
- madVR v0.89.14
- * added new "sharpen edges" algorithm
- * added new "crispen edges" algorithm (tamed FineSharp)
- * added new "thin edges" algorithm
- * added new "enhance detail" algorithm
- * removed SuperRes "radius" option (set to 0.66)
- * removed SuperRes "sharpness" option (set near to 2)
- * removed LumaSharpen "radius" option (set to 1.0)
- * removed LumaSharpen "clamp" option (set to 0.035)
- * removed "apply SuperRes first" option (set to true)
- * updated AdaptiveSharpen to 2015-11-05 (experimental) version
- * optimized "video size has changed" notifications to media player
- * optimized aspect ratio overriding API behaviour
Veranderingen voor v0.89.12 - v0.89.13
- * added support for rotation (0°, 90°, 180°, 270°) via key shortcut and API
- * videos are automatically rotated now, if the container/splitter says so
- * improved chroma quality when using DXVA on Intel (and maybe NVidia) GPUs
- * improved DXVA processing performance under specific circumstances
- * if DXVA is used, brightness, contrast, hue etc is applied by DXVA now
- * fixed a couple of DXVA processing related bugs
- * Intel/NVidia: DXVA2 image + Bilinear chroma upscaling -> DXVA chroma up
- * DVD Navigator AR has now priority over decoder / splitter / bitstream AR
- * updated AdaptiveSharpen to 2015-10-29 (experimental) version
- * added new profile rule script variables "display" and "variableAR"
- * optimized RAM consumption a bit, maybe
- * added option to not resume playback after lens memory change
- * fixed lens memory activation problem for Sony projectors
- * fixed: "runtime" profile variable didn't work properly
Veranderingen voor v0.89.11 - v0.89.12
- * added auto lens memory activation via "IP Control" for JVC & Sony projectors
- * added several new profile rule script variables
- * added IMadVRCommand::SendCommandDouble("setArOverride") support
- * when moving subtitle, margins are now relative to video height
- * fixed: memory leak introduced in v0.89.10
- * fixed: Catmull-Rom was broken since v0.89.10
- * fixed: potential cause for "old frame" flickering when using smooth motion
- * fixed: potential cause for "old frame" flickering in new windowed/FSE modes
Veranderingen voor v0.89.8 - v0.89.11
- * added SuperRes "sharpness" and "use linear light" options
- * optimized SuperRes performance with high "strength" values
- * modified subtitle mover to not change subtitle size, anymore
- * added "zoom control" option to move subtitles
- * added support for LAV DVD subtitle renderer
- * fixed: XySubFilter: high-res PGS with smaller-res video: wrong sub position
- * fixed: crash when LAV DVD subtitle renderer asked for a flush/clear
- * fixed: Smooth Motion + NNEDI3 + Bilinear could cause aliasing artifacts
- * fixed: #318: debanding sometimes caused black screen (once more)
Veranderingen voor v0.89.6 - v0.89.8
- * fixed: XySubFilter subtitles sometimes flickered when using smooth motion
Veranderingen voor v0.89.5 - v0.89.6
- * updated AdaptiveSharpen to latest version
- * added support for ISubRenderCallback3 interface
- * optimized DXVA fullscreen playback performance
- * fixed: freezes when closing media player, or switching to different monitor
- * fixed: another DXVA related crash
- * fixed: subtitle positioning was sometimes incorrect with MPC-HC/MPC-BE
- * fixed: disabling desktop composition was broken
- * fixed: slow switching between two h264 TV stations with identical resolution
- * fixed: OSD scaling information was sometimes incorrect
- * fixed: "setZoomOffsetX = -1" resulted in madVR totally stopping to work
Veranderingen voor v0.89.4 - v0.89.5
- * cleanup image borders can now optionally only crop black bar borders
- * implemented "move OSD and subtitles into active video area" option
- * madVR OSD now respects screen masking
- * optimized OSD APIs to allow media players to respect screen masking
- * optimized subtitle positioning for internal MPC-HC/MPC-BE subtitle renderer
- * added APIs for media players to set zoom/position modes
- * added IMadVRCommand::SendCommandInt("keyPress") support (J.River MC)
- * some render code cleanup (fully removed AMD interop hack etc)
- * fixed: one cause for shutdown crash with native DXVA decoding
- * fixed: OSD fused different luma/chroma NNEDI3 neurons into "image"
- * fixed: image enhancements "restore defaults" set LumaSharpen "clamp" wrong
Veranderingen voor v0.89.2 - v0.89.4
- * debug OSD now shows black bar, source and target rect details
- * added "redraw" command so MPC-HC/MPC-BE can redraw subtitles in paused mode
- * fixed: zero target rect / window size made madVR crash
- * fixed: native DXVA accepted all formats, even when they weren't supported
- * fixed: NNEDI3 OpenCL kernel was compiled even when using super-xbr or NEDI
- * fixed: new NNEDI3 interop no longer requires win7 platform update
- * fixed: sometimes NNEDI3 chroma doubling was incorrectly disabled
- * fixed: crash when using NNEDI3 with old windowed mode render path
- * fixed: option "if black bars change pick one zoom factor" had no effect
- * fixed: two deadlock causes when switching between 576i and 1080i videos
- * fixed: "keep bars visible if they contain subtitles" = "forever" didn't work
Veranderingen voor v0.88.21 - v0.89.2
- * fixed: one more media player startup crash
- * fixed: DXVA deinterlacing and black bar detection didn't like each other
- * fixed: DXVA scaling had some problems with v0.89.0 and v0.89.1
- * fixed: some media player size/pos zoom wishes were not properly applied
Veranderingen voor v0.88.13 - v0.88.21
- * OSD rendering back to 0.88.16 logic, except when low latency mode is active
- * fixed: DXVA processing failed when video stream switched resolution
- * fixed: render times weren't shown correctly
- * fixed: SuperRes bigger radius values could cause artifacts
- * fixed: low latency mode sometimes wasn't turned off when it should
Veranderingen voor v0.88.10 - v0.88.13
- * added super-xbr "sharpness" parameter (50, 75, 100 = default, 125)
- * big speed for super-xbr chroma upscaling
- * small speedup for super-xbr image doubling
- * FineSharp no longer uses linear light (for now)
- * added IMadVRCommand interface, replaces IMadVRSeekbar/ExclusiveModeControl
- * added IMadVRCommand::SendCommand("restoreDisplayModeNow") command
- * fixed: small logic/quality bug in super-xbr chroma upscaling
- * fixed: settings dialog always showed NNEDI3 chroma doubling to be enabled
Veranderingen voor v0.88.8 - v0.88.10
- fixed: some problems when using NNEDI3
- slightly modified "high" debanding preset, once more
Veranderingen voor v0.88.5 - v0.88.8
- * updated to latest Shiandow deband script
- * fixed: D3D11 didn't activate with "frames presented in advance" set to 16
- * fixed: ConfigureDisplayModeChanger(allowResolutionChanges = false) bug
Veranderingen voor v0.88.4 - v0.88.5
- * fixed: image quadrupling was buggy, sometimes crashed
- * fixed: LumaSharpen strength was truncated (0.99 -> 0.00)
Veranderingen voor v0.88.2 - v0.88.4
- * fixed startup crash in Windows 7, introduced in v0.88.3
- * NNEDI3 doubling: chroma is now always upscaled with max 2 taps
Veranderingen voor v0.87.21 - v0.88.2
- * added D3D11 option "present a frame for every VSync"
- * added option to choose medium/high SuperRes error upscaling quality
- * pages "image enhancements" and "upscaling refinement" are now profileable
- * fixed: dark video in windowed mode when using error dif with 10 bit display
- * fixed: FineSharp modes 2 and 3 corrupted image quality
- * fixed: some controls (FSE seekbar, and ZoomPlayer controls) didn't work
- * fixed: corrupted render times and more when using a lot of rendering steps
- * madVR no longer disables desktop composition when D3D11 is activated
- * if DWM is disabled, when madVR starts, D3D9 is used instead of D3D11
- * if DWM is disabled while madVR renders with D3D11, madVR pauses playback
Veranderingen voor v0.87.19 - v0.87.21
- * fixed: (un)install.bat now works without having to manually "run as admin"
- * fixed: active display wasn't properly set in the settings (x64)
- * added workaround for window subclassing crash (x64)
Veranderingen voor v0.87.16 - v0.87.19
- fixed: seeking sometimes froze (e.g. with Haali Splitter)
- fixed: DXVA scaling with "use a separate device for DXVA" -> black screen
Veranderingen voor v0.87.15 - v0.87.16
- * fixed: #181: "deint" tag sometimes didn't work when using profiles
- * fixed: #267: crash when seeking with smooth motion enabled
- * fixed: #272: black screen in old windowed mode
- * fixed: #275: image freeze when switching from new path to old path window mode
- * fixed: some BT.709 video files were misdetected as BT.601
- * reintroduced the "interop hack" option
- * improved DXVA color space conversion performance again
- * added trade option "trust DXVA color & levels conversion"
- * SettingsSetBoolean("DebugOsd") now turns the debug OSD on/off
Veranderingen voor v0.87.13 - v0.87.15
- changed DXVA scaling logic to produce proper quality with AMD drivers
- improved DXVA color space conversion performance
- new trade option "use DXVA chroma upscaling when doing native DXVA decoding"
- new trade option "use DXVA chroma upscaling when doing DXVA deinterlacing"
- new trade option "lose BTB and WTW if it improves performance"
- added scaling algorithm information to OSD
- added 3dlut split screen mode (can only be activated via key shortcut)
- added a few stability fixes/workarounds
- fixed: #033: display mode changer sometimes didn't switch to 75hz
- fixed: #176: no image on portrait (rotated) displays
- fixed: #199: decimation didn't work with 4:4 cadence (PAL 50p)
- fixed: #201: decimation didn't work with 4:2:2:2 cadence
- fixed: #203: cadence info sometimes went "unknown" in debug OSD
- fixed: #205: XySubFilter subtitles sometimes weren't visible
- fixed: #213: bad edit detection didn't work with 6:4 cadence (ATSC 60p)
- fixed: #222: crash when using a large number of shaders
- fixed: #227: Zoom Player OSD "pause" message sometimes wasn't shown
- fixed: #230: madVR refresh rate changer caused DVD playback to break
- fixed: #233: shared NVidia/AMD/Intel GPUs (e.g. Optimus) showed black screen
- fixed: #254: madVR 0.87.14 sometimes crashed when using XySubFilter
- fixed: #255: original system timer resolution wasn't restored on unload
- fixed: #257: OSD information sometimes shows "1.#J days"
- fixed: crash when decreasing GPU queue size
- removed software decoders
- removed trade option "don't use "copyback" for DXVA deinterlacing"
- removed trade option "don't use "copyback" for DXVA decoding"
- removed option "use OpenCL to process DXVA NV12 surfaces"
- removed option "use alternative interop hack (not recommended, AMD only)"
- removed option "use managed upload textures (XP only)"
- added support for ZoomPlayer's mouse scroll zoom functionality
- "Exclusive/Windowed" OSD messages don't overwrite other messages, anymore
Veranderingen voor v0.87.12 - v0.87.13
- * madTPG: added "madVR_Find" API
- * madTPG: fixed "madVR_GetVersion" API
- * added OSD API stretch option
Veranderingen voor v0.87.11 - v0.87.12
- * fixed: v0.87.11 broke madTPG API compatability
- * madTPG: added dropdown box to allow manual gamut/3dlut selection
- * madTPG: loading a 3dlut now takes immediate effect in madTPG
- * madTPG: added API "GetVersion"
- * madTPG: added API "Get/SetSelected3dlut"
- * madTPG: number of pre-presented frames is now limited to max 3
Veranderingen voor v0.87.10 - v0.87.11
- fixed: AR downscaling after NNEDI3 luma only upscaling produced artifacts
- fixed: madTPG API "madVR_ConnectToIp(127.0.0.1)" sometimes didn't work
- madTPG: added API "Connect" with various options
- madTPG: added API "Quit" to close the connected madTPG instance
- madTPG: added APIs "Get/SetPatternConfig" & "ShowRGBEx"
- madTPG: added APIs "IsStayOnTopButtonPressed" & "SetStayOnTopButton"
- madTPG: added APIs "IsUseFullscreenButtonPressed" & "SetUseFullscreenButton"
- madTPG: added APIs "IsDisableOsdButtonPressed" & "SetDisableOsdButton"
- madTPG: added various new 3dlut conversion and loading APIs
- madTPG: added IP address information to title bar
Veranderingen voor v0.87.9 - v0.87.10
- added some optimizations to reduce AMD OpenCL interop cost
- added new windowed presentation path ("present several frames in advance")
- added support for decimating 50p/60p movies to 25p/24p
- added profile strings "filePath/Name/Ext", with wild char ("?", "*") support
- fixed: #181: profile auto switching sometimes invalidated file name tags
- fixed: #192: black flashing with Smooth Motion + NNEDI3 chroma doubling
- fixed: #193: image corruption when up&down scale is needed at the same time
- fixed: crash on Vista when trying to activate error diffusion
- fixed: Intel OpenCL CPU driver sometimes crashed
- OpenCL should now automatically prefer NVidia GPUs on Optimus laptops
- refresh rate hack is now only installed on Windows 8 (and newer)
- "Pause" OSD message no longer blocked
- file "madshi.net/madVR/version.txt" lists the current version number
- file "madshi.net/madVR/sha1.txt" lists SHA1 hash of the current "madVR.zip"
Veranderingen voor v0.87.8 - v0.87.9
- * fixed: NNEDI3 didn't work properly on AMD/Intel (introduced in v0.87.8)
- * fixed: native DXVA decoding + NNEDI3 chroma up + NVidia -> green color cast
- * fixed: #032: Smooth Motion FRC sometimes failed to activate
- * fixed: #096: Smooth Motion FRC resulted in last/only frame being hidden
- * fixed: #097: Smooth Motion FRC didn't respect "treat 25p movies as 24p"
- * fixed: #098: "Treat 25p movies as 24p" now only activates up to 25.5fps
- * fixed: #104: "Delay playback until ..." failed when toggling subtitles
- * fixed: #113: film mode key shortcut didn't enable Smooth Motion FRC
- * fixed: #124: videoLUTs were not properly restored in multi monitor setup
- * fixed: #132: Image corruption when leaving FSE with 3dlut loaded
- * fixed: #171: film mode activation with display mode change could crash
- * fixed: #178: RGB/YUV 4:4:4 with mod2 height showed black screen
- * fixed: #182: NNEDI3 chroma up neuron count wasn't properly memorized
- * fixed: #187: switching subtitles triggered a short black screen
- * fixed: #189: Smooth Motion FRC sometimes activated when not needed
- * NNEDI3 no longer offsets by 0.5 pixel if Luma needs to be resampled, anyway
- * added "HKCU\Software\madshi\madVR\OpenCL\forceVendor" override option
- * modified madLevelsTweaker GUI to make intended multi monitor usage clearer
Veranderingen voor v0.87.7 - v0.87.8
- added workaround for NVidia OpenCL <-> D3D9 interop driver bug
- fixed: #158: NNEDI3 chroma upscaling + DXVA deint + NVidia -> green image
- fixed: DirectCompute rendering resources weren't properly released
- fixed: some multi monitor problems introduced in v0.87.7
- fixed: smooth motion frc sometimes incorrectly dropped frames
- fixed: toggling subtitle "trade quality" option required restart
- some DirectCompute stability improvements
- added vendor based OpenCL device filtering
- non-DX11-GPUs: error diffusion now falls back to ordered dithering
- improved Windows 8.1 FSE mode refresh rate hack
Veranderingen voor v0.87.5 - v0.87.7
- added linear light processing for ordered dithering and error diffusion
- added "trade quality for performance" option for linear light dithering
- fixed: #175: Banding appears if bitdepth is set to '7 bit'
- fixed: crash in MC19 when switching videos with native DXVA decoding
- fixed: rare overlay stability problems introduced in v0.87.5
- random dithering doesn't round down to less than 8bit, anymore
- "present several frames in advance = off" now auto-disables error diffusion
- display bitdepth can be be set to as low as 1bit (just for testing)
- added silent exception handling for Intel OpenCL initialization crashes
- madTPG now optionally supports APL windows (gamma and linear light)
- madTPG now has a minimum image area of 4% instead of 10%
- madTPG now draws a 20 pixel black border around the measurement area
- madTPG now properly supports dynamic dithering (didn't before)
- madTPG dithering was optimized to not dither for integer test patterns
- madTPG headers and demo projects updated
- madVR in a media player no longer supports test pattern, only madTPG does
Veranderingen voor v0.87.4 - v0.87.5
- error diffusion now uses DirectCompute (DX11 GPU needed) instead of OpenCL
- added fast and reasonably high quality "ordered dithering" algorithm
- added "rendering\dithering" settings page with many new options
- new default dithering is now ordered dithering instead of random dithering
- madTPG now always uses monochromatic ordered dithering
- fixed: #107: XySubFilter: reducing CPU queue size during playback -> crash
- fixed: #112: 120fps clip resulted in 23Hz being selected instead of 60Hz
- fixed: #119: installation resulted in "might not have installed correctly"
- fixed: #123: XySubFilter: Nearest Neighbor/Bilinear distorted subtitles
- fixed: #125: forced film mode with unsupported FOURCCs: graphical corruption
- fixed: #133: XySubFilter: opaque black box when smooth motion was enabled
- fixed: #136: when playback is stopped, madVR now always turns the video off
- fixed: #137: Nearest Neighbor/Bilinear has problems with post-resize shaders
- fixed: #138: smooth motion FRC flickered when using Nearest Neighbor
- fixed: #145: DCI-P3 was using an incorrect white point
- fixed: #155: screeshots sometimes had an added black border
- fixed: #159: speciying DCI-P3 as the calibrated gamut -> green screen
- fixed: #160: corruption with uncompressed 4096x2304 v210 in AVI
- fixed: #161: YUV 4:4:4 videos with weird resolutions crashed madVR
- fixed: #165: overlay mode restricted madVR to single player window
- fixed: #167: dithering produced dithering noise on pure black areas
- fixed: #169: dithering produced dithering noise on pure white areas
- fixed: #170: Overlay mode sometimes unnecessarily cleared GPU gamma ramps
- fixed: Overlay mode applied 3dlut and gamma ramps in wrong order
- fixed: crash reporting didn't catch exceptions in private threads, anymore
- fixed: crash when using XySubFilter with small GPU queue size
- fixed: DVD navigator was not released properly by madVR
- fixed: Run/Seek hooks also affected secondary DirectShow graphs
- fixed: profile key shortcuts only worked for "scaling" profiles
- fixed: full range YCbCr input produced slightly incorrect colors
- reduced Overlay mode graphical corruption when resizing media player
- exclusive -> windowed switch now shows a black frame instead of an old one
- removed XySubFilter auto-loading functionality, it's now XySubFilter's job
- disabled resolution based DCI-P3 auto detection
- changed default luma doubling value to 32 neurons
- display bitdepth can be be set to as low as 3bit (just for testing)
Veranderingen voor v0.87.0 - v0.87.4
- * workaround added: NNEDI3 upscaling failed/froze with newer NVidia GPUs
- * fixed: NNEDI3 chroma upscaling produced wrong colors with 10bit sources
- * got rid of some unnecessary texture sharing
- v0.87.3:
- * fixed: blacked out video in Windows XP
- * fixed: blacked out video when disabling "present several frames in advance"
- v0.87.2:
- * fixed: D3D9 device wasn't freed properly, resulting in stability problems
- * fixed: using shared NV12 surfaces resulted in DXVA performance drop
- * fixed: opening settings without connected decoder took 5 seconds
- * fixed: chroma Jinc keyboard shortcut activated NNEDI3
- * fixed: chroma NNEDI3 keyboard shortcut was not listed in the settings
- v0.87.1:
- * fixed: CPU consumption was unnecessarily high
- * fixed: auto profile switching didn't fully work
- * fixed: uploading was very slow, resulting in performance problems
- * fixed: chroma channels were swapped when using error diffusion with NVidia
- * fixed: some OpenCL crashes when using OpenCL 1.2 DLL with NVidia
- * fixed: smooth motion FRC produced black image in some situations
- * fixed: video mode deinterlacing was completely broken
Veranderingen voor v0.86.11 - v0.87.0
- added debanding algorithm, based on improved version of "flash3kyuu_deband"
- added file name tag "deband=off|low|medium|high"
- added automatic detection for fades from/to black or white (for debanding)
- added support for using OpenCL with NVidia, AMD and Intel GPUs
- added DXVA surface splitting via OpenCL (only AMD and Intel GPUs)
- added error diffusion algorithm (requires OpenCL)
- added NNEDI3 chroma upsampling (requires OpenCL)
- added NNEDI3 image doubling/quadrupling (requires OpenCL)
- added flexible settings profile functionality
- added file name tag "profile='profile name'"
- added IMadVRSettings2 interface to enumerate settings and manage profiles
- settings can now be edited without madVR running (only on local PC)
- madNvLevelsTweaker -> madLevelsTweaker now also works for Intel GPUs
- madVR doesn't dither, anymore, when a pixel doesn't need dithering
- added Intel driver bug workaround for "use separate device for presentation"
- added madHcNet64.dll to allow madTPG automation from 64bit calibration tools
- added API for asking madVR about the output levels (TV, PC, custom)
- fixed: full backbuffer queue slowed rendering down
- fixed: madTPG sometimes didn't update to newly requested test pattern color
- fixed: madTPG dithering produced blocking artifacts
- fixed: when upscaling exactly 2x, AR filter wasn't active for blue channel
- fixed: ArgyllCMS/HCFR disabling the 3dlut didn't work
- fixed: LAV Video Decoder sending v210 produced corrupted image
- improved frame cropping support
- improved windowproc hook stability
- a couple of very small pixel shader performance improvements
- optimized madVR default settings
- improved madVR tray icon menu looks on newer OSs
- tags now require "tag=value" or "tag:value"; "tag value" no longer accepted
- disabled automatic DCI-P3 detection through 2048 video width
Veranderingen voor v0.86.10 - v0.86.11
- added import functionality for eeColor 3dlut files
Veranderingen voor v0.86.9 - v0.86.10
- * fixed: #084: occasional black frames with smooth motion
- * fixed: #115: XySubFilter: opaque black box on older GPUs
- * fixed: smooth motion FRC could artifact with bilinear scaling
- * added support for disabling XySubFilter auto-loading
- * added "madVR_GetDeviceGammaRamp" calibration test pattern API
- * when closing madTPG, original VideoLUTs gets restored at once
Veranderingen voor v0.86.8 - v0.86.9
- fixed: madHcCtrl.exe had the wrong exe icon
- using linear light is now default for smooth motion FRC
- added new trade quality option "optimize subtitle quality for performance"
- modified the time when display mode is restored when media player closes
- win8 FSE refresh rate fix is now also applied without display mode changer
- added API to allow more control over test pattern progress bar
- cleaned up 3dlut and VideoLUT disable/define priorities
- improved support for combined 3dlut/VideoLUT file format ("collink -H")
Veranderingen voor v0.86.7 - v0.86.8
- fixed: entering FSE mode sometimes caused a delay (introduced in v0.86.7)
- added support for specifying a separate external 3dlut for each source gamut
- gamut conversion is now skipped if the 3dlut gamut matches the source gamut
- madTPG: screensaver is blocked (except if it is passworded!)
- madTPG: screen is prevented from going to sleep
- madTPG: added "stay on top" button
- madTPG: changed the way the "fullscreen" button works
- madTPG: window size/state and all settings are auto saved now
- madTPG: now works without requiring madVR to be installed
- madTPG: fixed: crash when madVR was not installed
Veranderingen voor v0.86.6 - v0.86.7
- added "madTPG.exe" test pattern generator for calibration purposes
- added support for combined 3dlut/VideoLUT file format ("collink -H")
- option "Disable GPU gamma ramps" should now work in windowed mode, too
- fixed: #30: ZoomPlayer got stuck in 'on top' mode after leaving FSE
- fixed: #90: wrong refresh rate (23/24, 59/60) in win8 in FSE mode
- fixed: #91: added madVR version information to settings dialog
- fixed: #92: shaders were not applied to XySubFilter subtitles
- fixed: #93: overlay mode ignored ICC VideoLUTs
- fixed: pixel shader VideoLUT implementation didn't use linear filtering
- fixed: crash when display mode is changed externally (DXVA processing)
- XySubFilter: improved subtitle upload performance
- XySubFilter: optimized downscaling of bitmap based subtitles
- XySubFilter: madVR consumer now reports "preferTvLevels = true"
- XySubFilter: improved performance, if provider sends TV levels subtitles
Veranderingen voor v0.86.5 - v0.86.6
- added smooth motion frame rate conversion algorithm
- added settings page for smooth motion frc configuration
- added "trade quality for performance" option for smooth motion frc
- added test patterns to madTestPatternSource to test smooth motion frc
- added support for drawing remote controlled calibration test patterns
- added support for DCI-P3 and BT.2020 primaries and BT.2020 matrix
- added support for "matrix=2020" and "primaries=2020|DCI" tags
- added resolution based auto detection for DCI-P3
- added explicit detection for non PS3.0 capable GPUs
- added IMadVRInfo interface which makes all sorts of info available
- fixed: RGB input with odd width/height is now accepted untouched
- fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
- fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
- fixed: occasional crash when using DXVA scaling with high-bitdepth content
- fixed: green line at the left image border when using DXVA scaling
- fixed: refresh rate changing didn't always work correctly in Windows 8
- fixed: MPC-BE title bar didn't handle unicode characters correctly
- fixed: ZoomPlayer: cosmetical issue when pausing in FSE mode
- fixed: #18: decoder queue sometimes exceeded limits
- fixed: #23: video didn't follow overlay window position when paused
- fixed: #35: framerate tag was not working
- fixed: #37: when no video duration was known, seekbar was not shown
- fixed: #42: memory leak with certain OSD elements
- fixed: #44: GraphStudioNext "Performance Test" Crash
- fixed: #46: XySubFilter: 3DLUT was not applied to frames with subtitles
- fixed: #47: XySubFilter: subtitles weren't rerendered after scaling change
- fixed: #48: XySubFilter: incorrect positioning after downscaling
- fixed: #49: XySubFilter: incorrect PGS subtitle positions
- fixed: #50: XySubFilter: smooth motion FRC caused subtitles flicker
- fixed: #51: settings dialog now mentions both ReClock and VideoClock
- fixed: #52: XySubFilter: incorrect ASS subtitle positions
- fixed: #55: FSE seek bar resulted in inaccurate seeking for DVDs
- fixed: #62: crash when external 3dlut file with long filename was missing
- fixed: #65: film refresh rate was used with dxva decoding -> deinterlacing
- fixed: #66: Cineform decoder v210 (10-bit 4:2:2) corruption
- fixed: #72: display mode restauration didn't work correctly in win8
- fixed: #73: display mode was not restored when playback was stopped in MC18
- fixed: #74: fullscreen <-> windowed can be slow with large CPU queue
- fixed: #79: XySubFilter: non-color-corrected subtitles had wrong levels
- fixed: #81: Repeated frames count increases when video is paused
- increased max CPU queue size to 128 frames
- renamed madHcNet.dll to madHcNet32.dll
- file "settings.bin" is not written into win7/8 "VirtualStore", anymore
- tray icon appears faster now
- slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
- improved exclusive mode presentation timing with jittery audio clock a bit
- filter enumeration timer is now only active during DVD playback
- extended logging for fullscreen exclusive presentation queue
- internal software video decoders are now disabled by default (again)
Veranderingen voor v0.86.4 - v0.86.5
- added smooth motion frame rate conversion algorithm
- added settings page for smooth motion frc configuration
- added "trade quality for performance" option for smooth motion frc
- added test patterns to madTestPatternSource to test smooth motion frc
- added support for drawing remote controlled calibration test patterns
- added support for DCI-P3 and BT.2020 primaries and BT.2020 matrix
- added support for "matrix=2020" and "primaries=2020|DCI" tags
- added resolution based auto detection for DCI-P3
- added explicit detection for non PS3.0 capable GPUs
- added IMadVRInfo interface which makes all sorts of info available
- fixed: RGB input with odd width/height is now accepted untouched
- fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
- fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
- fixed: occasional crash when using DXVA scaling with high-bitdepth content
- fixed: green line at the left image border when using DXVA scaling
- fixed: refresh rate changing didn't always work correctly in Windows 8
- fixed: MPC-BE title bar didn't handle unicode characters correctly
- fixed: ZoomPlayer: cosmetical issue when pausing in FSE mode
- fixed: #18: decoder queue sometimes exceeded limits
- fixed: #23: video didn't follow overlay window position when paused
- fixed: #35: framerate tag was not working
- fixed: #37: when no video duration was known, seekbar was not shown
- fixed: #42: memory leak with certain OSD elements
- fixed: #44: GraphStudioNext "Performance Test" Crash
- fixed: #46: XySubFilter: 3DLUT was not applied to frames with subtitles
- fixed: #47: XySubFilter: subtitles weren't rerendered after scaling change
- fixed: #48: XySubFilter: incorrect positioning after downscaling
- fixed: #49: XySubFilter: incorrect PGS subtitle positions
- fixed: #50: XySubFilter: smooth motion FRC caused subtitles flicker
- fixed: #51: settings dialog now mentions both ReClock and VideoClock
- fixed: #52: XySubFilter: incorrect ASS subtitle positions
- fixed: #55: FSE seek bar resulted in inaccurate seeking for DVDs
- fixed: #62: crash when external 3dlut file with long filename was missing
- fixed: #65: film refresh rate was used with dxva decoding -> deinterlacing
- fixed: #66: Cineform decoder v210 (10-bit 4:2:2) corruption
- fixed: #72: display mode restauration didn't work correctly in win8
- fixed: #73: display mode was not restored when playback was stopped in MC18
- fixed: #74: fullscreen <-> windowed can be slow with large CPU queue
- fixed: #79: XySubFilter: non-color-corrected subtitles had wrong levels
- fixed: #81: Repeated frames count increases when video is paused
- increased max CPU queue size to 128 frames
- renamed madHcNet.dll to madHcNet32.dll
- file "settings.bin" is not written into win7/8 "VirtualStore", anymore
- tray icon appears faster now
- slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
- improved exclusive mode presentation timing with jittery audio clock a bit
- filter enumeration timer is now only active during DVD playback
- extended logging for fullscreen exclusive presentation queue
- internal software video decoders are now disabled by default (again)
Veranderingen voor v0.86.3 - v0.86.4
- added smooth motion frame rate conversion algorithm
- added settings page for smooth motion frc configuration
- added "trade quality for performance" option for smooth motion frc
- added test patterns to madTestPatternSource to test smooth motion frc
- added support for drawing remote controlled calibration test patterns
- added support for DCI-P3 and BT.2020 primaries and BT.2020 matrix
- added support for "matrix=2020" and "primaries=2020|DCI" tags
- added resolution based auto detection for DCI-P3
- added explicit detection for non PS3.0 capable GPUs
- added IMadVRInfo interface which makes all sorts of info available
- fixed: RGB input with odd width/height is now accepted untouched
- fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
- fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
- fixed: occasional crash when using DXVA scaling with high-bitdepth content
- fixed: green line at the left image border when using DXVA scaling
- fixed: refresh rate changing didn't always work correctly in Windows 8
- fixed: MPC-BE title bar didn't handle unicode characters correctly
- fixed: ZoomPlayer: cosmetical issue when pausing in FSE mode
- fixed: #18: decoder queue sometimes exceeded limits
- fixed: #23: video didn't follow overlay window position when paused
- fixed: #35: framerate tag was not working
- fixed: #37: when no video duration was known, seekbar was not shown
- fixed: #42: memory leak with certain OSD elements
- fixed: #44: GraphStudioNext "Performance Test" Crash
- fixed: #46: XySubFilter: 3DLUT was not applied to frames with subtitles
- fixed: #47: XySubFilter: subtitles weren't rerendered after scaling change
- fixed: #48: XySubFilter: incorrect positioning after downscaling
- fixed: #49: XySubFilter: incorrect PGS subtitle positions
- fixed: #50: XySubFilter: smooth motion FRC caused subtitles flicker
- fixed: #51: settings dialog now mentions both ReClock and VideoClock
- fixed: #52: XySubFilter: incorrect ASS subtitle positions
- fixed: #55: FSE seek bar resulted in inaccurate seeking for DVDs
- fixed: #62: crash when external 3dlut file with long filename was missing
- fixed: #65: film refresh rate was used with dxva decoding -> deinterlacing
- fixed: #66: Cineform decoder v210 (10-bit 4:2:2) corruption
- fixed: #72: display mode restauration didn't work correctly in win8
- fixed: #73: display mode was not restored when playback was stopped in MC18
- fixed: #74: fullscreen <-> windowed can be slow with large CPU queue
- fixed: #79: XySubFilter: non-color-corrected subtitles had wrong levels
- fixed: #81: Repeated frames count increases when video is paused
- increased max CPU queue size to 128 frames
- renamed madHcNet.dll to madHcNet32.dll
- file "settings.bin" is not written into win7/8 "VirtualStore", anymore
- tray icon appears faster now
- slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
- improved exclusive mode presentation timing with jittery audio clock a bit
- filter enumeration timer is now only active during DVD playback
- extended logging for fullscreen exclusive presentation queue
- internal software video decoders are now disabled by default (again)
Veranderingen voor v0.86.2 - v0.86.3
- * added resolution based auto detection for DCI-P3
- * fixed: ZoomPlayer: cosmetical issue when pausing in FSE mode
- * fixed: #72: display mode restauration didn't work correctly in win8
- * fixed: #73: display mode was not restored when playback was stopped in MC18
- * fixed: #74: fullscreen <-> windowed can be slow with large CPU queue
- * fixed: #79: XySubFilter: non-color-corrected subtitles had wrong levels
Veranderingen voor v0.86.1 - v0.86.2
- * added smooth motion frame rate conversion algorithm
- * added settings page for smooth motion frc configuration
- * added "trade quality for performance" option for smooth motion frc
- * added test patterns to madTestPatternSource to test smooth motion frc
- * added support for DCI-P3 and BT.2020 primaries and BT.2020 matrix
- * added support for "matrix=2020" and "primaries=2020|DCI" tags
- * added resolution based auto detection for BT.2020 (UHD) and DCI-P3
- * added explicit detection for non PS3.0 capable GPUs
- * added IMadVRInfo interface which makes all sorts of info available
- * fixed: RGB input with odd width/height is now accepted untouched
- * fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
- * fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
- * fixed: occasional crash when using DXVA scaling with high-bitdepth content
- * fixed: green line at the left image border when using DXVA scaling
- * fixed: refresh rate changing didn't always work correctly in Windows 8
- * fixed: MPC-BE title bar didn't handle unicode characters correctly
- * fixed: #18: decoder queue sometimes exceeded limits
- * fixed: #23: video didn't follow overlay window position when paused
- * fixed: #35: framerate tag was not working
- * fixed: #37: when no video duration was known, seekbar was not shown
- * fixed: #42: memory leak with certain OSD elements
- * fixed: #44: GraphStudioNext "Performance Test" Crash
- * fixed: #46: xy-vsfilter: 3DLUT was not applied to frames with subtitles
- * fixed: #47: xy-vsfilter: subtitles weren't rerendered after scaling change
- * fixed: #48: xy-vsfilter: incorrect positioning after downscaling
- * fixed: #49: xy-vsfilter: incorrect PGS subtitle positions
- * fixed: #50: xy-vsfilter: smooth motion FRC caused subtitles flicker
- * fixed: #51: settings dialog now mentions both ReClock and VideoClock
- * fixed: #52: xy-vsfilter: incorrect ASS subtitle positions
- * fixed: #55: FSE seek bar resulted in inaccurate seeking for DVDs
- * fixed: #62: crash when external 3dlut file with long filename was missing
- * fixed: #65: film refresh rate was used with dxva decoding -> deinterlacing
- * fixed: #66: Cineform decoder v210 (10-bit 4:2:2) corruption
- * increased max CPU queue size to 128 frames
- * file "settings.bin" is not written into win7/8 "VirtualStore", anymore
- * slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
- * improved exclusive mode presentation timing with jittery audio clock a bit
- * filter enumeration timer is now only active during DVD playback
- * extended logging for fullscreen exclusive presentation queue
- * internal software video decoders are now disabled by default (again)
Veranderingen voor v0.86.0 - v0.86.1
- * added smooth motion frame rate conversion algorithm
- * added settings page for smooth motion frc configuration
- * added "trade quality for performance" option for smooth motion frc
- * added test patterns to madTestPatternSource to test smooth motion frc
- * fixed: RGB input with odd width/height is now accepted untouched
- * fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
- * fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
- * fixed: occasional crash when using DXVA scaling with high-bitdepth content
- * fixed: green line at the left image border when using DXVA scaling
- * file "settings.bin" is not written into win7/8 "VirtualStore", anymore
- * slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
- * improved exclusive mode presentation timing with jittery audio clock a bit
- * filter enumeration timer is now only active during DVD playback
- * extended logging for fullscreen exclusive presentation queue
- * internal software video decoders are now disabled by default (again)
Veranderingen voor v0.85.8 - v0.86.0
- * added smooth motion frame rate conversion algorithm
- * added settings page for smooth motion frc configuration
- * added "trade quality for performance" option for smooth motion frc
- * added test patterns to madTestPatternSource to test smooth motion frc
- * fixed: RGB input with odd width/height is now accepted untouched
- * fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
- * fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
- * fixed: occasional crash when using DXVA scaling with high-bitdepth content
- * fixed: green line at the left image border when using DXVA scaling
- * file "settings.bin" is not written into win7/8 "VirtualStore", anymore
- * slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
- * filter enumeration timer is now only active during DVD playback
- * extended logging for fullscreen exclusive presentation queue
- * internal software video decoders are now disabled by default (again)
Veranderingen voor v0.85.7 - v0.85.8
- added support for external DXVA2 decoders
- added support for DXVA2 scaling
- added support for custom pixel shaders (pre- and post-scaling)
- added support for media player color controls (IVMRMixerControl9)
- added support for "IQualProp" interface for media player statistics display
- added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
- added dithering to 10/16bit -> NV12 conversion routines
- added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
- added options for custom display output levels
- added display specific color controls
- added volatile source color controls, with keyboard shortcuts
- added color correction and auto-loading for new subtitle interface
- added auto correction if FPS upstream info is wrong by 2x or 0.5x factor
- added support for IVideoWindow::put_BorderColor()
- added double/triple expanded TV range to "source levels" toggle
- added a couple "trade quality for performance" options
- added support for several new file name tags
- added "repeated frames" OSD info (only when framerate = refresh rate)
- up to 56% speed improvement for Jinc3 chroma upscaling
- up to 40% speed improvement for Jinc3 AR chroma upscaling
- up to 53% speed impr. for Jinc3/4 image upscaling with 2x scaling factor
- up to 47% speed impr. for Jinc3/4 AR image upscaling with 2x scaling factor
- up to 39% speed impr. for non-Jinc image upscaling with 2x scaling factor
- up to 27% speed impr. for non-Jinc AR image upscaling with 2x scaling factor
- up to 44% speed impr. for non-Jinc image upscaling with 3x scaling factor
Veranderingen voor v0.85.6.1 - v0.85.7
- added support for external DXVA2 decoders
- added support for DXVA2 scaling
- added support for custom pixel shaders (pre- and post-scaling)
- added support for media player color controls (IVMRMixerControl9)
- added support for "IQualProp" interface for media player statistics display
- added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
- added dithering to 10/16bit -> NV12 conversion routines
- added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
- added options for custom display output levels
- added display specific color controls
- added volatile source color controls, with keyboard shortcuts
- added color correction and auto-loading for new subtitle interface
- added auto correction if FPS upstream info is wrong by 2x or 0.5x factor
- added support for IVideoWindow::put_BorderColor()
- added double/triple expanded TV range to "source levels" toggle
- added a couple "trade quality for performance" options
- added support for several new file name tags
- up to 56% speed improvement for Jinc3 chroma upscaling
- up to 40% speed improvement for Jinc3 AR chroma upscaling
- up to 53% speed impr. for Jinc3/4 image upscaling with 2x scaling factor
- up to 47% speed impr. for Jinc3/4 AR image upscaling with 2x scaling factor
- up to 39% speed impr. for non-Jinc image upscaling with 2x scaling factor
- up to 27% speed impr. for non-Jinc AR image upscaling with 2x scaling factor
- up to 44% speed impr. for non-Jinc image upscaling with 3x scaling factor
Veranderingen voor v0.85.4 - v0.85.5
- * added support for external DXVA2 decoders
- * added support for DXVA2 scaling
- * added support for custom pixel shaders (pre- and post-scaling)
- * added support for media player color controls (IVMRMixerControl9)
- * added support for "IQualProp" interface for media player statistics display
- * added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
- * added dithering to 10/16bit -> NV12 conversion routines
- * added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
- * added options for custom display output levels
- * added display specific color controls
- * added volatile source color controls, with keyboard shortcuts
- * added color correction and auto-loading for new subtitle interface
- * added auto correction if FPS upstream info is wrong by 2x or 0.5x factor
- * added support for IVideoWindow::put_BorderColor()
- * added double/triple expanded TV range to "source levels" toggle
- * added "trade quality" option "use half frame rate for DXVA deinterlacing"
- * added support for several new file name tags
- * up to 56% speed improvement for Jinc3 chroma upscaling
- * up to 40% speed improvement for Jinc3 AR chroma upscaling
- * up to 53% speed impr. for Jinc3/4 image upscaling with 2x scaling factor
- * up to 47% speed impr. for Jinc3/4 AR image upscaling with 2x scaling factor
- * up to 39% speed impr. for non-Jinc image upscaling with 2x scaling factor
- * up to 27% speed impr. for non-Jinc AR image upscaling with 2x scaling factor
- * up to 44% speed impr. for non-Jinc image upscaling with 3x scaling factor
Veranderingen voor v0.85.2 - v0.85.4
- added support for external DXVA2 decoders
- added support for DXVA2 scaling
- added support for custom pixel shaders (pre- and post-scaling)
- added support for media player color controls (IVMRMixerControl9)
- added support for "IQualProp" interface for media player statistics display
- added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
- added dithering to 10/16bit -> NV12 conversion routines
- added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
- added options for custom display output levels
- added display specific color controls
- added volatile source color controls, with keyboard shortcuts
- added color correction and auto-loading for new subtitle interface
- added auto correction if FPS upstream info is wrong by 2x or 0.5x factor
- added support for IVideoWindow::put_BorderColor()
- added double/triple expanded TV range to "source levels" toggle
- added "trade quality" option "use half frame rate for DXVA deinterlacing"
- added support for several new file name tags
Veranderingen voor v0.85.1 - v0.85.2
- added support for external DXVA2 decoders
- added support for DXVA2 scaling
- added support for custom pixel shaders (pre- and post-scaling)
- added support for media player color controls (IVMRMixerControl9)
- added support for "IQualProp" interface for media player statistics display
- added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
- added dithering to 10/16bit -> NV12 conversion routines
- added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
- added options for custom display output levels
- added display specific color controls
- added volatile source color controls, with keyboard shortcuts
- added color correction and auto-loading for new subtitle interface
Veranderingen voor v0.84.7 - v0.85.1
- added support for external DXVA2 decoders
- added support for DXVA2 scaling
- added support for custom pixel shaders (pre- and post-scaling)
- added support for media player color controls (IVMRMixerControl9)
- added support for "IQualProp" interface for media player statistics display
- added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
- changed default scaling settings
Veranderingen voor v0.84.7 - v0.85.0
- added support for external DXVA2 decoders
- added support for DXVA2 scaling
- added support for custom pixel shaders (pre- and post-scaling)
- added support for media player color controls (IVMRMixerControl9)
- added support for "IQualProp" interface for media player statistics display
- added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
- changed default scaling settings
Veranderingen voor v0.84.3 - v0.84.7
- fixed: DVD playback often resulted in Macrovision errors
- improved Jinc AR algorithm for clean computer type images/videos
- added support for new subtitle interface (e.g. for future xy-vsfilter build)
- fixed: encrypted DVDs didn't play
- fixed: DVD menu "clickable areas" were not always located correctly
- fixed: DVD menu buttons near the FSE seekbar didn't work
- fixed: some minor cosmetical improvements to DVD menu rendering
- fixed: seeking DVDs in fullscreen exclusive mode didn't flush the decoder
- fixed: frame stepping should now work perfectly
- fixed: MPC-HC froze when creating thumbnails
- fixed: MPC-HC froze when seeking DVDs in Windows XP
- fixed: scaling settings were not always remembered after "restore default"
- 50i and 50p SD sources are now auto detected as having PAL/EBU primaries
Veranderingen voor v0.84.2 - v0.84.3
- added media player screenshot functionality (IBasicVideo::GetCurrentImage)
- added "Jinc" image upscaling algorithm
- added anti-ringing filter for downscaling
- added "user interface\keyboard shortcuts" settings page
- added option to apply keys "only if media player has keyboard focus"
- added options to adjust the keys for all existing keyboard shortcuts
- added shortcut option for directly selecting specific source primaries
- added shortcut option for directly selecting specific deint content types
- added shortcut option for en/disabling automatic fullscreen exclusive mode
- added shortcut option for disabling exclusive mode for 10 seconds
- added shortcut option for en/disabling the display mode switcher
- added shortcut option for en/disabling dithering
- added shortcut option for changing the display bitdepth
- added various shortcut options for selecting scaling algorithms
- added IMadVRExclusiveModeCallback interface for exclusive mode notifications
- renamed "luma up/downscaling" to "image up/downscaling"
- renamed "use 10bit luma buffer ..." to "use 10bit image buffer ..."
- scaling algorithm parameters (softness, sharpness, taps) are remembered now
- scaling algorithm red/green graphs (settings dialog) now cover anti-ringing
- modified shader storage to decrease madVR.ax file size
- fixed: KMPlayer + madVR decoders + "delay playback start" was always paused
- fixed: settings dialog had problems with yCMS data when using Overlay mode
- fixed: cosmetical issue in fullscreen windowed mode when changing video files
Veranderingen voor v0.84.0 - v0.84.2
- added media player screenshot functionality (IBasicVideo::GetCurrentImage)
- added "Jinc" image upscaling algorithm
- added anti-ringing filter for downscaling
- added "user interface\keyboard shortcuts" settings page
- added option to apply keys "only if media player has keyboard focus"
- added options to adjust the keys for all existing keyboard shortcuts
- added shortcut option for directly selecting specific source primaries
- added shortcut option for directly selecting specific deint content types
- added shortcut option for en/disabling automatic fullscreen exclusive mode
- added shortcut option for disabling exclusive mode for 10 seconds
- added shortcut option for en/disabling the display mode switcher
- added shortcut option for en/disabling dithering
- added shortcut option for changing the display bitdepth
- added various shortcut options for selecting scaling algorithms
- added IMadVRExclusiveModeCallback interface for exclusive mode notifications
- renamed "luma up/downscaling" to "image up/downscaling"
- renamed "use 10bit luma buffer ..." to "use 10bit image buffer ..."
- scaling algorithm parameters (softness, sharpness, taps) are remembered now
- scaling algorithm red/green graphs (settings dialog) now cover anti-ringing
- modified shader storage to decrease madVR.ax file size
- fixed: KMPlayer + madVR decoders + "delay playback start" was always paused
- fixed: settings dialog had problems with yCMS data when using Overlay mode
- fixed: cosmetical issue in fullscreen windowed mode when changing video files
Veranderingen voor v0.83.7 - v0.84.0
- added media player screenshot functionality (IBasicVideo::GetCurrentImage)
- added "Jinc" image upscaling algorithm
- added anti-ringing filter for downscaling
- added "user interface\keyboard shortcuts" settings page
- added option to apply keys "only if media player has keyboard focus"
- added options to adjust the keys for all existing keyboard shortcuts
- added shortcut option for directly selecting specific source primaries
- added shortcut option for directly selecting specific deint content types
- added shortcut option for en/disabling automatic fullscreen exclusive mode
- added shortcut option for disabling exclusive mode for 10 seconds
- added shortcut option for en/disabling the display mode switcher
- added shortcut option for en/disabling dithering
- added shortcut option for changing the display bitdepth
- added various shortcut options for selecting scaling algorithms
- added IMadVRExclusiveModeCallback interface for exclusive mode notifications
- renamed "luma up/downscaling" to "image up/downscaling"
- renamed "use 10bit luma buffer ..." to "use 10bit image buffer ..."
- scaling algorithm parameters (softness, sharpness, taps) are remembered now
- scaling algorithm red/green graphs (settings dialog) now cover anti-ringing
- modified shader storage to decrease madVR.ax file size
- fixed: KMPlayer + madVR decoders + "delay playback start" was always paused
- fixed: settings dialog had problems with yCMS data when using Overlay mode
- fixed: cosmetical issue in fullscreen windowed mode when changing video files
Veranderingen voor v0.83.6 - v0.83.7
- added "enable windowed overlay (Windows 7 and newer)" option
- added "anti-ringing" option for chroma and luma scaling
- added extra "delay playback start after seeking, too" option
- added new calibration option "disable GPU gamma ramps"
- doubled exclusive mode seekbar in size
- added position / runtime information to exclusive mode seekbar
- removed some tweak options (rendered superfluous by new WHQL NVidia driver)
- madVR window is now created and served by a separate thread
- Windows timer/scheduler is now always set to finest possible resolution
- modified DXVA deinterlacing to work a bit more similar to EVR
- AVI Decompressor output is now always considered to be decompressed video
- added workaround to hide kmplayer crash when resizing video
- fixed: crash when multiple madVR instances are created at the same time
- fixed: freeing madVR instance sometimes resulted in a crash
- fixed: VSFilter passes RGB -> input was incorrectly considered limited range
- fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
- fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
- fixed: crash when playing certain video files with AVSplitter
Veranderingen voor v0.83.5 - v0.83.6
- added "enable windowed overlay (Windows 7 and newer)" option
- added "anti-ringing" option for chroma and luma scaling
- added extra "delay playback start after seeking, too" option
- added new calibration option "disable GPU gamma ramps"
- doubled exclusive mode seekbar in size
- added position / runtime information to exclusive mode seekbar
- removed some tweak options (rendered superfluous by new WHQL NVidia driver)
- madVR window is now created and served by a separate thread
- Windows timer/scheduler is now always set to finest possible resolution
- modified DXVA deinterlacing to work a bit more similar to EVR
- AVI Decompressor output is now always considered to be decompressed video
- added workaround to hide kmplayer crash when resizing video
- fixed: crash when multiple madVR instances are created at the same time
- fixed: freeing madVR instance sometimes resulted in a crash
- fixed: VSFilter passes RGB -> input was incorrectly considered limited range
- fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
- fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
- fixed: crash when playing certain video files with AVSplitter
Veranderingen voor v0.83.4 - v0.83.5
- added "enable windowed overlay (Windows 7 and newer)" option
- added "anti-ringing" option for chroma and luma scaling
- added extra "delay playback start after seeking, too" option
- added new calibration option "disable GPU gamma ramps"
- doubled exclusive mode seekbar in size
- added position / runtime information to exclusive mode seekbar
- removed some tweak options (rendered superfluous by new WHQL NVidia driver)
- madVR window is now created and served by a separate thread
- Windows timer/scheduler is now always set to finest possible resolution
- modified DXVA deinterlacing to work a bit more similar to EVR
- AVI Decompressor output is now always considered to be decompressed video
- added workaround to hide kmplayer crash when resizing video
- fixed: crash when multiple madVR instances are created at the same time
- fixed: freeing madVR instance sometimes resulted in a crash
- fixed: VSFilter passes RGB -> input was incorrectly considered limited range
- fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
- fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
- fixed: crash when playing certain video files with AVSplitter
Veranderingen voor v0.83.2 - v0.83.4
- added "enable windowed overlay (Windows 7 and newer)" option
- added "anti-ringing" option for chroma and luma scaling
- added extra "delay playback start after seeking, too" option
- added new calibration option "disable GPU gamma ramps"
- doubled exclusive mode seekbar in size
- added position / runtime information to exclusive mode seekbar
- removed some tweak options (rendered superfluous by new WHQL NVidia driver)
- madVR window is now created and served by a separate thread
- Windows timer/scheduler is now always set to finest possible resolution
- modified DXVA deinterlacing to work a bit more similar to EVR
- AVI Decompressor output is now always considered to be decompressed video
- added workaround to hide kmplayer crash when resizing video
- fixed: crash when multiple madVR instances are created at the same time
- fixed: freeing madVR instance sometimes resulted in a crash
- fixed: VSFilter passes RGB -> input was incorrectly considered limited range
- fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
- fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
- fixed: crash when playing certain video files with AVSplitter
Veranderingen voor v0.82.5 - v0.83.2
- added "enable windowed overlay (Windows 7 and newer)" option
- added "anti-ringing" option for chroma and luma scaling
- added extra "delay playback start after seeking, too" option
- added new calibration option "disable GPU gamma ramps"
- doubled exclusive mode seekbar in size
- added position / runtime information to exclusive mode seekbar
- removed some tweak options (rendered superfluous by new WHQL NVidia driver)
- madVR window is now created and served by a separate thread
- Windows timer/scheduler is now always set to finest possible resolution
- modified DXVA deinterlacing to work a bit more similar to EVR
- AVI Decompressor output is now always considered to be decompressed video
- added workaround to hide kmplayer crash when resizing video
- fixed: crash when multiple madVR instances are created at the same time
- fixed: freeing madVR instance sometimes resulted in a crash
- fixed: VSFilter passes RGB -> input was incorrectly considered limited range
- fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
- fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
- fixed: crash when playing certain video files with AVSplitter
Veranderingen voor v0.82.4 - v0.82.5
- added: new option to activate deinterlacing if in doubt whether it's needed
- added: new IVTC option to only look at pixels in the frame center
- added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
- deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
- improved IVTC cadence logic
- improved DXVA deinterlacing behaviour slightly
- improved display mode change event handling
- improved exclusive -> windowed switch a little bit more
- lots of fixes
Veranderingen voor v0.82.3 - v0.82.4
- added: new option to activate deinterlacing if in doubt whether it's needed
- added: new IVTC option to only look at pixels in the frame center
- added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
- deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
- improved IVTC cadence logic
- improved DXVA deinterlacing behaviour slightly
- improved display mode change event handling
- improved exclusive -> windowed switch a little bit more
- fixed: madVR sometimes didn't notice changed display mode
- fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
- fixed: crash when moving madVR to another display with ZoomPlayer
- fixed: freeze when switching subtitles in paused state
- fixed: closing down madVR didn't always wait for the closing to complete
- fixed: closing the media player while madVR was in exclusive mode -> freeze
- fixed: sometimes asking for a freeze report created multiple reports at once
- fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
- fixed: when switching from Bicubic to SoftCubic, options weren't updated
- fixed: red error messages were supposed to disappear after a while but didn't
- fixed: red error messages no longer show duplicate error messages
- fixed: a couple of crashes and freezes
Veranderingen voor v0.81 - v0.82.3
- added: new option to activate deinterlacing if in doubt whether it's needed
- added: new IVTC option to only look at pixels in the frame center
- added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
- deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
- improved IVTC cadence logic
- improved DXVA deinterlacing behaviour slightly
- improved display mode change event handling
- improved exclusive -> windowed switch a little bit more
- fixed: madVR sometimes didn't notice changed display mode
- fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
- fixed: crash when moving madVR to another display with ZoomPlayer
- fixed: freeze when switching subtitles in paused state
- fixed: closing down madVR didn't always wait for the closing to complete
- fixed: closing the media player while madVR was in exclusive mode -> freeze
- fixed: sometimes asking for a freeze report created multiple reports at once
- fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
- fixed: when switching from Bicubic to SoftCubic, options weren't updated
- fixed: red error messages were supposed to disappear after a while but didn't
- fixed: red error messages no longer show duplicate error messages
Veranderingen voor v0.81 - v0.82.1
- added: new option to activate deinterlacing if in doubt whether it's needed
- added: new IVTC option to only look at pixels in the frame center
- added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
- deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
- improved IVTC cadence logic
- improved DXVA deinterlacing behaviour slightly
- improved display mode change event handling
- improved exclusive -> windowed switch a little bit more
- fixed: madVR sometimes didn't notice changed display mode
- fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
- fixed: crash when moving madVR to another display with ZoomPlayer
- fixed: freeze when switching subtitles in paused state
- fixed: closing down madVR didn't always wait for the closing to complete
- fixed: closing the media player while madVR was in exclusive mode -> freeze
- fixed: sometimes asking for a freeze report created multiple reports at once
- fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
- fixed: when switching from Bicubic to SoftCubic, options weren't updated
- fixed: red error messages were supposed to disappear after a while but didn't
- fixed: red error messages no longer show duplicate error messages
Veranderingen voor v0.80 - v0.81
- added automatic exception catching functionality
- added manual freeze report functionality (press Ctrl+Alt+Shift+Break)
- added option to switch display mode only when media player is in fullscreen
- added option to restore display mode when media player leaves fullscreen
- display mode changer now reacts on film (24p) vs. video (60p) content type
- improved renderer behaviour when display mode changes
- improved ivtc: faster detection of cadence changes
- improved ivtc: more robust against compression artifacts
- deint + ivtc is now auto activated for 60i movies which are tagged to 24 Hz
- ivtc is now auto activated for 50i movies which are tagged to 25 or 24 Hz
- deinterlacing is only turned on for 50i and 60i movies now
- added patch to MS VC-1 decoder -> deinterlacing off
- modified file name tagging logic (24p, 24i, 24fps, 24Hz, etc)
- improved behaviour with decoders which don't output proper interlaced flags
- improved exclusive -> windowed mode behaviour slightly, mainly for ZoomPlayer
- added "sharpness: 100" option for Bicubic scaling
- queue sizes are now always 16/8 by default, no more automatic adjustments
- keyboard shortcuts: always only change things temporarily by default now
- keyboard shortcuts: some changes (not all) can be stored by pressing F2 now
- the source levels (TV vs PC) can be stored now
- the source content type (film vs video) can be stored now
- key presses are now only "swallowed" if media player process has key focus
- osd keyboard handling runs in its own thread now
- added many more languages to the "Pause" MPC-HC message block
- used GPU RAM is now not shown in osd, anymore
- increased upload thread priority slightly
- fixed: ZoomPlayer eventually froze when leaving exclusive mode
- fixed: some users had composition rate in exclusive mode OSD -> problems
- fixed: crash when video window size was reduced to a very small size
- fixed: frame stepping sometimes resulted in weird play/pause mixed state
- fixed: one case where "delay playback start..." resulted in paused state
- fixed: v210 pitch/stride handling was broken
- fixed: YV24 had swapped chroma channels
- fixed: YV24 DXVA deinterlacing resulted in image corruption
- fixed: OSD API didn't capture mouse events on mouse down
Veranderingen voor v0.79 - v0.80
- added IVTC algo with decimation and support for 3:2, PAL and Anime cadences
- Ctrl+Alt+Shift+T switches between video (DXVA) and film (IVTC) content type
- fixed: moving media player to another monitor made DXVA deinterlacing crash
- fixed: DXVA deinterlacing produced wrong colors (only with HD videos + ATI)
- fixed: after a refresh rate change the composition rate didn't update
- fixed: calculation of consumed GPU RAM was wrong
- fixed: minimizing ZoomPlayer with playing video made some problems
- fixed: v0.79 didn't always detect external refresh rate changes
- fixed: some h264 AVI files made madVR crash, depending on the splitter
- fixed: improved internal decoder MPEG2 timestamp handling
- fixed: zooming video extremely small made madVR close the media player
- fixed: video was positioned wrong when media player cropped top/left
- fixed: a couple of small Direct3D related bugs
- fixed: a little resource leak
- improved presentation timestamp correction a bit
- improved "IMadVRExclusiveModeInfo::IsExclusiveModeActive"
- improved "IMadVRExclusiveModeControl::DisableExclusiveMode"
- added window size checks to detect to-be-expected exlusive mode failures
- added new interface "IMadVRDirect3D9Manager" for XBMC (work in progress)
- modified automatic queue sizes
- improved logging during media player shutdown
Veranderingen voor v0.78 - v0.79
- modified deinterlacing logic to save GPU RAM
- added resource manager to save GPU RAM and a little bit of GPU performance
- added information about used / total GPU RAM to debug OSD (Ctrl+J)
- added new options to choose decoder and GPU queue sizes
- added automatic adjustment of queue sizes, based on GPU RAM size
- corrected queue sizes with deinterlacing turned on (size 1 too high in v0.78)
- improved deinterlacing quality at the start of playback and after seeks
- improved the way madVR calls DXVA2 (now more similar to EVR)
- moved some eventually CPU intensive code from render to separate thread
- optimized performance of DXVA2->PixelShader texture conversion for some GPUs
- optimized internal libav decoder format conversion logic
- movie frame rate overwrite via file name now also set deinterlacing on/off
- option "perform deinterlacing in separate thread" is now "on" by default
- MPC-HC OSD text "Pausa" is now blocked (to avoid disappearing subtitles)
- fixed: source cropping (J.River MC) could result in corrupted chroma channel
- fixed: IMediaSample allocator wasn't fit for decoder queue size of 12 frames
Veranderingen voor v0.77 - v0.78
- added support for DXVA2 deinterlacing
- added option to enable/disable automatic activation of deinterlacing
- added option to force off deinterlacing for 48i sources
- added option enable/disable performing deinterlacing in a separate thread
- added auto 4:2:2/4:4:4 to 4:2:0 conversion when using DXVA2 deinterlacing
- added OSD deinterlacing information
- Ctrl+Alt+Shift+D turns deinterlacing on/off
- Ctrl+Alt+Shift+F switches deinterlacing field order (auto, top, bottom first)
- changed gamma decrease key combo from Ctrl+Alt+Shift+F to Ctrl+Alt+Shift+B
- increased decoder queue size to 12 frames
- added support for h264 10bit 4:2:2 decoding
- improved frame stepping
- improved internal frame locking mechanism
- removed warning "creating 10bit render texture failed, used 8bit instead"
- updated libav/ffmpeg dlls
Veranderingen voor v0.76 - v0.77
- added support for ffmpeg/libav h264 4:2:2 decoding
- optimized ffmpeg/libav compiling options
- fixed: madVR disliked getting 2 frames with identical timecodes all the time
- modified autodetect priorities slightly
Veranderingen voor v0.74 - v0.75
- fixed: v0.74 stopped decoder DirectShow filter from being released properly
- fixed: PotPlayer sometimes crashed when switching video files
- fixed: internal decoders made problems with cropped MKVs & Haali Splitter
- fixed: OSD sometimes didn't appear in ZoomPlayer in exclusive mode
- fixed: VP70 decoder showed video upside down
- fixed: RGB24 input sometimes crashed madVR
- fixed: ffdshow RGB input level detection sometimes failed
- subtitles run through the 3dlut now, too
- internal decoders are now auto disabled if required decoder dlls are missing
- added option to scale Luma in linear light, disabled by default
- RGB input with unknown range is now treated by default as full range
- added detailed information about matrix, primaries and levels to debug OSD
- updated libav/ffmpeg dlls
Veranderingen voor v0.73 - v0.74
- fixed: internal decoder showed 10bit video with non-mod-4 width distorted
- fixed: primaries/matrix auto detection eventually failed if ffdshow upscaled
- fixed: MPEG2 internal decoder timestamps didn't work well with DVDs/VOBs
- fixed: ZoomPlayer "Media: Next Track" -> OSD "windowed" stayed forever
- fixed: corruption with ordered chapters, when using internal decoders
- added new interface "IMadVRExclusiveModeControl"
- added new interface "IMadVRSettings"
- added support for h264 files with a 3-byte NAL length
Veranderingen voor v0.71 - v0.73
- fixed (again): video playback in PotPlayer froze in various situations
- fixed: OSD changes could result in dropped frames (reverted to older code)
- fixed: crash if the source filter reported a NULL file name
Veranderingen voor v0.70 - v0.71
- for DVD playback start, "delay playback start..." option is now auto disabled
- when OSD changes, render queue is cut down to 3/8 to make OSD more responsive
- when madVR pauses/starts/stops graph, notification message 0xFA17 is sent now
- fixed: crash with NVidia PureVideo MPEG2 Decoder
- fixed: crash with h264 AVI content
- fixed: unpause delay with internal decoders in exclusive mode
- fixed: subtitles disappeared when pausing playback
- fixed: madVR caused "File Source Async" to never be destroyed
- fixed: full range YCbCr input showed a green tint (introduced with v0.70)
Veranderingen voor v0.65 - v0.66
- rewritten large parts of the OSD logic
- added APIs for media player devs to draw their OSDs/GUIs in exclusive mode
- added API for media player devs to disable the madVR seekbar
- fixed: OSD is now above subtitles instead of under
- OSD + seekbar are now drawn to full window size, not to video rect, anymore
- madVR debug OSD is now white with a dark background
- using higher internal precision for internal calculations now
- fixed a couple of bug in gamma / gamut / 3dlut processing
- instead of yRGB, madVR/yCMS are now using the measured display primaries
- improved compatability with uncompressed video files
- fixed: avisynth -> ffdshow -> RGB -> madVR produced upside down image
- fixed: seekbar showed up when playback monitor was positioned "under" primary
- simplified calibration settings a bit more
Veranderingen voor v0.63 - v0.65
- added display "properties", "calibration" and "color & gamma" settings pages
- added option to define the native display bitdepth (affects dither strength)
- added options to define how the display was calibrated (gamut + gamma)
- moved "Video/PC levels" option to display "properties" settings page
- added options to define which gamma / transfer function to use
- replaced old "use 3dlut" option with new controls on "calibration" page
- added integrated GUI for yCMS 3dlut creation, no more console hacking needed
- added "please wait" dialog while yCMS is downloaded + installed
- added "please wait" dialog while 3dlut file is created
- added support for 6 and 7 bit 3dlut files (see trade quality for performance)
- added option to choose a manually created external 3dlut file (per display)
- there's only one 3dlut file per display now
- 3dlut is now always yRGB / RGB_Video input and RGB_Video output
- YCbCr -> RGB conversion is now always done by shader math, not by 3dlut
- Video/PC levels conversion is now always done by shader math, not by 3dlut
- rewritten rendering and pixel shader chain
- subsampled YCbCr is now upsampled & converted to RGB first, then scaled
- chroma upsampling got quite a bit faster (because it's now always exactly 2x)
- luma scaling got a tiny bit faster, depending on scaling factor and taps
- Ctrl+Alt+Shift+G displays and increases the Gamma value (2.20 -> 2.25 -> ...)
- Ctrl+Alt+Shift+F displays and decreases the Gamma value (2.20 -> 2.15 -> ...)
- dither is using a texture again instead of shader math
- dither is now colored and differs for every video frame
- added support for 8 bit 4:2:0 media types IYUV, I420, NV21, ICM*
- added support for 8 bit 4:2:2 media types YUY2, YVYU, UYVY, YV16, yuv2, ...
- added support for 8 bit 4:4:4 media types AYUV, YV24, I444, v308, v408
- added support for 8 bit RGB media types RGB32, RGB24, BGRA, ABGR, RGBA
- added support for 10 bit 4:2:2 media types P210, Y210, v210
- added support for 10 bit 4:4:4 media types Y410, v410
- added support for 16 bit 4:2:2 media types P216, Y216, v216
- added support for 16 bit 4:4:4 media types Y416, v416
- added support for 16 bit RGB media types RGB48, RGB64, b48r, b64a, ...
- added hints to "install.bat" and "readme.txt" to not delete the madVR folder
- fixed: madVR rendering window in GraphEdit didn't have correct size
- changed VSync priority back to "time critical"
- slightly changed tray icon mouse click behaviour
- fixed: couple of bugs in the display mode changer
- added new "enable gamma processing" option (default = off)
- Ctrl+Alt+Shift+C toggles gamma curve type
- Ctrl+Alt+Shift+M toggles decoding matrix
- Ctrl+Alt+Shift+P toggles source primaries
- added support for switching to 59i/60i display mode for 59p/60p content
- Windows key now only stops exclusive mode when running on primary monitor
- seekbar is now shown only if mouse cursor is on playback monitor
- when the PC is locked (Windows Key + L) madVR now pauses playback
- fixed: D3D11 playback on secondary monitor could result in window size bug
Veranderingen voor v0.62 - v0.63
- added display "properties", "calibration" and "color & gamma" settings pages
- added option to define the native display bitdepth (affects dither strength)
- added options to define how the display was calibrated (gamut + gamma)
- moved "Video/PC levels" option to display "properties" settings page
- added options to define which gamma / transfer function to use
- replaced old "use 3dlut" option with new controls on "calibration" page
- added integrated GUI for yCMS 3dlut creation, no more console hacking needed
- added "please wait" dialog while yCMS is downloaded + installed
- added "please wait" dialog while 3dlut file is created
- added support for 6 and 7 bit 3dlut files (see trade quality for performance)
- added option to choose a manually created external 3dlut file (per display)
- there's only one 3dlut file per display now
- 3dlut is now always yRGB / RGB_Video input and RGB_Video output
- YCbCr -> RGB conversion is now always done by shader math, not by 3dlut
- Video/PC levels conversion is now always done by shader math, not by 3dlut
- rewritten rendering and pixel shader chain
- subsampled YCbCr is now upsampled & converted to RGB first, then scaled
- chroma upsampling got quite a bit faster (because it's now always exactly 2x)
- luma scaling got a tiny bit faster, depending on scaling factor and taps
- Ctrl+Alt+Shift+C displays & toggles color format (BT.709 -> BT.601 -> PAL)
- Ctrl+Alt+Shift+G displays and increases the Gamma value (2.20 -> 2.25 -> ...)
- Ctrl+Alt+Shift+F displays and decreases the Gamma value (2.20 -> 2.15 -> ...)
- Ctrl+Alt+Shift+T displays and changes the Gamma curve type (pure power / BT)
- dither is using a texture again instead of shader math
- dither is now colored and differs for every video frame
- added support for 8 bit 4:2:0 media types IYUV, I420, NV21, ICM*
- added support for 8 bit 4:2:2 media types YUY2, YVYU, UYVY, YV16, yuv2, ...
- added support for 8 bit 4:4:4 media types AYUV, YV24, I444, v308, v408
- added support for 8 bit RGB media types RGB32, RGB24, BGRA, ABGR, RGBA
- added support for 10 bit 4:2:2 media types P210, Y210, v210
- added support for 10 bit 4:4:4 media types Y410, v410
- added support for 16 bit 4:2:2 media types P216, Y216, v216
- added support for 16 bit 4:4:4 media types Y416, v416
- added support for 16 bit RGB media types RGB48, RGB64, b48r, b64a, ...
- added hints to "install.bat" and "readme.txt" to not delete the madVR folder
- fixed: madVR rendering window in GraphEdit didn't have correct size
- changed VSync priority back to "time critical"
- slightly changed tray icon mouse click behaviour
- fixed: couple of bugs in the display mode changer
- added new "enable gamma processing" option (default = off)
Veranderingen voor v0.61 - v0.62
- added display "properties", "calibration" and "color & gamma" settings pages
- added option to define the native display bitdepth (affects dither strength)
- added options to define how the display was calibrated (gamut + gamma)
- moved "Video/PC levels" option to display "properties" settings page
- added options to define which gamma / transfer function to use
- replaced old "use 3dlut" option with new controls on "calibration" page
- added integrated GUI for yCMS 3dlut creation, no more console hacking needed
- added "please wait" dialog while yCMS is downloaded + installed
- added "please wait" dialog while 3dlut file is created
- added support for 6 and 7 bit 3dlut files (see trade quality for performance)
- added option to choose a manually created external 3dlut file (per display)
- there's only one 3dlut file per display now
- 3dlut is now always yRGB / RGB_Video input and RGB_Video output
- YCbCr -> RGB conversion is now always done by shader math, not by 3dlut
- Video/PC levels conversion is now always done by shader math, not by 3dlut
- rewritten rendering and pixel shader chain
- subsampled YCbCr is now upsampled & converted to RGB first, then scaled
- chroma upsampling got quite a bit faster (because it's now always exactly 2x)
- luma scaling got a tiny bit faster, depending on scaling factor and taps
- Strg+Alt+Shift+C displays & toggles color format (BT.709 -> BT.601 -> PAL)
- Strg+Alt+Shift+G displays and increases the Gamma value (2.20 -> 2.25 -> ...)
- Strg+Alt+Shift+F displays and decreases the Gamma value (2.20 -> 2.15 -> ...)
- Strg+Alt+Shift+T displays and changes the Gamma curve type (pure power / BT)
- dither is using a texture again instead of shader math
- dither is now colored and differs for every video frame
- added support for 8 bit 4:2:0 media types IYUV, I420, NV21, ICM*
- added support for 8 bit 4:2:2 media types YUY2, YVYU, UYVY, YV16, yuv2, ...
- added support for 8 bit 4:4:4 media types AYUV, YV24, I444, v308, v408
- added support for 8 bit RGB media types RGB32, RGB24, BGRA, ABGR, RGBA
- added support for 10 bit 4:2:2 media types P210, Y210, v210
- added support for 10 bit 4:4:4 media types Y410, v410
- added support for 16 bit 4:2:2 media types P216, Y216, v216
- added support for 16 bit 4:4:4 media types Y416, v416
- added support for 16 bit RGB media types RGB48, RGB64, b48r, b64a, ...
- added hints to "install.bat" and "readme.txt" to not delete the madVR folder
- fixed: madVR rendering window in GraphEdit didn't have correct size
- changed VSync priority back to "time critical"
- slightly changed tray icon mouse click behaviour
Veranderingen voor v0.60 - v0.61
- * added D3D11 presentation path
- * renamed glitch hack to "use a separate device for presentation"
- * added option to activate D3D11 presentation path
- * switched and renamed option "present only one frame at a time"
- * added tweak option "run presentation in a separate thread"
- * added tweak option "limit rendering times to avoid glitches"
- * added option "restore original display mode when media player closes"
- * added option "treat 25p movies as 24p (requires Reclock)"
- * added new tweak option "overshoot max frame latency"
- * added detection for "Windows Key" press -> switch out of exclusive mode
- * fixed: having only one mode in the display mode switcher didn't work
- * fixed: when entering fullscreen, sometimes the seekbar incorrectly showed up
- * fixed: changing refresh rate behind madVR's back resulted in a freeze
- * fixed: ZoomPlayer froze when moving to secondary monitor fullscreen playback
- * a couple more minor changes and bugfixes