Versie historie van Macrium Reflect Standard

<<Terug naar software beschrijving

Veranderingen voor v5.3.7109 - v5.3.7134

• Reduced memory usage when backing up large partitions.
• The amount of memory required when backing up multi-Terabyte partitions has been reduced.
• Additional logging.
• Clones and Image Restores (in Windows) now generate logs and can be viewed by clicking the 'Log' tab.
• Server Plus - Exchange 2010 mailbox restore improvements.
• Improved the authentication requirements when restoring mailboxes from Exchange 2010.
• Server Plus - New Exchange verification dialog.
• A new user friendly verification dialog for verifying exchange backups.
• Dynamic disks shown for all editions of Macrium Reflect.
• Dynamic disks were hidden from the Reflect main window for the Free and Standard editions of Macrium Reflect. Dynamic disks are now shown but imaging and cloning is not possible unless running the Professional or Server editions.
• Retain existing disk signature when cloning.
• When cloning to a pre-initialized disk, the existing disk signature is retained.
• Bug Fixes:
• Upgrade install license key improvements
• When running an upgrade msi install the currently installed license key is now pre-populated in the install dialog.
• XML File rename problem.
• When taking the XML rename function in Reflect, some irrelevant shortcuts may have been indicated as requiring updating. This has been resolved.
• Bug with File and Folder restore time remaining.
• Incorrect restore time remaining could be indicated when selecting the option to 'Only replace if different'. This has been resolved.
• Application error at start-up
• Reflect could crash at start-up if a bad sector is detected when reading the NTFS file system bitmap. This has been resolved.

---

Veranderingen voor v5.2.6515 - v5.2.6526

• Windows PE drivers
• When creating the WinPE rescue media, specific drivers that could cause Windows PE to crash at startup are now excluded.
• USB rescue media
• Flash media drives formatted using 'USB-ZIP' are now supported
• Bug Fixes:
• ReDeploy
• Win8/8.1 redeploy failed with some mass storage drivers. This has been resolved.
• Pre-snapshot user script problem
• The VSS snapshot could begin before the "_before_snapshot_wait.bat" script had completed. This has been resolved
• Extended partition support
• Improved compatibly with non-sequential, Linux configured, extended partition layouts.
• PE 5 Auto restore
• When restoring a Windows system partition from within Windows the auto boot into PE 5 would not be available. This has been resolved.
• Encrypted NTFS filesystem clone
• Clones including encrypted NTFS filesystems could fail. This has been resolved

---

Veranderingen voor v5.2.6444 - v5.2.6465

• Windows PE 3.1 build problems
• The Windows PE 3.1 rescue media build process could error with "An error occurred mounting the Windows Image File". This has been resolved
• Bug Fixes: 5.2.6463:
• Linux rescue CD build problem
• Release v5.2.6462 caused a problem with the rescue media creation wizard when building Linux based media. This has been resolved
• What's new? 5.2.6462:
• Windows PE 5.0
• Macrium Reflect now includes the option to create Windows PE 5.0 rescue media. Windows PE 5.0 is based on Windows 8.1 and provides the latest Windows kernel and driver database. Windows PE 5.0 rescue media can be created with all Windows operating systems except for Windows XP.
• Prompt for comment
• To enter a new Image comment when running an existing backup definition, select the backup definition and take the 'Run Now' > 'Prompt' context menu option and click the 'Comment' button.
• Bug fixes:
• Error when burning rescue media
• When burning a rescue CD/DVD the process could incorrectly abort with the message 'Please insert erasable or empty CD/DVD media'. This has been resolved

---

Veranderingen voor v5.2.6437 - v5.2.6444

• File and Folder backup issue with 'Chinese Simplified' System Locale
• Certain Chinese characters could cause files to be invisible when mounted in Windows Explorer when backed up using Windows set to 'Chinese Simplified' System Locale. This has been resolved
• SMTP Email Server connection problem
• A connection problem with 'outlook.com' has been resolved.
• Program crash after completion of backup
• If a backup was initiated when displaying the 'Log' tab a program error could occur at the end of the backup. This has been resolved

---

Veranderingen voor v5.2.6377 - v5.2.6399

• New options for handling NTFS reparse points.
• Reflect now contains the option to follow or backup the definitions of folder symbolic links and junction points.
• Menu option in Windows PE environment to change keyboard layout.
• A new menu option is available in the Windows PE environment to change the keyboard layout in use. Additionally, keyboard recognition on boot has been improved.
• Server edition now writes Windows events to the classic application channel as well as the Macrium channel.
• A number of customers have requested that Macrium Reflect logs events to the classic application channel for parsing by third party log analysis software. This has been implemented.
• Improved PE download integrity checking.
• Macrium Reflect now performs additional integrity checks on downloaded files when building PE Rescue Media.
• Bug fixes:
• Issue with approved shell extension.
• Customers have reported a rare conflict between specific group policy settings for approved shell extensions and the Macrium Reflect shell. This has been resolved.
• Version 4.2 upgrade issues.
• Some customers have reported an error message when trying to install version 5.2 using a version 4.2 upgrade key. This has been resolved.
• Program error when extracting Windows PE files.
• Some customers have reported a program error when burning rescue media. This has been resolved.

---

Veranderingen voor v5.2.6354 - v5.2.6377

• Bug fixes:
• * Image mounting driver update
• - The image mounting driver 'psmounterex.sys' was incorrectly reverted to an older version in the previous update. This has now been corrected.

---

Veranderingen voor v5.2.6249 - v5.2.6307

• Drive selection for Windows PE component files
• An option is now available to choose/move the drive that contains the Windows PE boot/rescue CD files. Take 'Other tasks' > 'Defaults' > 'Advanced' > 'Macrium Reflect PE Files' to access this functionality. Please note that this option is not available for Windows XP or Server 2003.
• Bug fixes:
• Explorer context menu issue
• Some customers have reported that the Macrium Reflect Explorer right click context menu could cause Explorer to crash. This was caused by a conflict with the NVidia Control Panel app context menu and has been resolved.
• Technicians license portable edition issue
• The tech license edition version of Macrium reflect could fail to launch on x64 systems. This has been resolved.

---

Veranderingen voor v5.1.5444 - v5.1.5496

• Windows 8 - Full integration of Windows PE 4.0
• Macrium Reflect now integrates with the Windows Assessment and Deployment Kit (ADK) for Windows PE 4.0 rescue environment creation.
• For more information on this, please see here: Win 8 ADK
• Bug fixes:
• UEFI flash rescue media formatting problem
• UEFI USB boot could fail if the USB flash device was not formatted FAT32. The media is now always formatted using FAT32 if UEFI boot is selected.
• Program error when loading the drivers page in the rescue media wizard
• For some customers, Reflect could crash when displaying the 'Rescue Media Drivers' page. This has been resolved.

---

Veranderingen voor v5.1.5396 - v5.1.5439

• Add Recovery Boot Menu Problem
• The 'Pre-Built WIM' boot menu option could fail to be created. This has been resolved.
• UEFI 'Backup Windows' option
• The 'Backup' > 'Backup Windows' menu option could exclude the automatic selection of the EFI system partition on UEFI booting systems. This has been resolved.
• GPT restore/cloning
• A program crash could occur if the target disk was encrypted prior to the restore/clone operation. This has been resolved.

---

Veranderingen voor v4.2.3584 - v5.0.4286

• Bug fixes:5.0.4286:
• Rescue Wizard Driver Copy
• A rare case where a security catalog was not being copied for a driver in the rescue media. This has been resolved.
• Custom File names
• When using custom files names, the file name could have a '1' unnecessarily appended to the end to ensure uniqueness. This was caused by DSM purge and file name generation sequence. This has been resolved.
• Rescue CD WAIK Files
• Issue when creating the standard WinPE rescue CD. Was copying the WAIKFiles folder if present. This has been resolved.
• Dynamic Disk Restores
• The restore process was updating the BCD if the target disk was dynamic. This has been resolved.
• TextEdit in WinPE
• TextEdit in WinPE was not correctly handling UTF8 and UTF16 based text files. This has been resolved.
• PEExplorer in WinPE
• The 'Del' key in the directory path edit control of Windows PE Explorer would not delete characters in the directory path. This has been resolved.
• x64 WAIK Rescue Media Creation
• The driver copy function for the 64 bit WAIK based Windows PE rescue CD could fail if the standard Windows PE component was installed. This has been resolved.
• Dynamic Disks Fix Boot Problems
• The Windows PE function "Fix Boot Problems" may fail to work for system that boot into a dynamic disk. This has been resolved.
• WinPE Dynamic Disk/Volume Imaging
• If a dynamic disk/volume was imaged while running Windows PE the image may fail with error 'Access Denied'. This has been resolved.
• Bug fixes:5.0.4258:
• ReDeploy 64 bit issue
• A very infrequent issue where ReDeploy was not setting the correct drivers on 64 bit platforms with certain chipsets. This has been resolved.
• What's new? 5.0.4253:
• Windows Home Server
• Macrium Reflect Standard and Professional Editions now fully support Windows Home Server platform
• File And Folder Backup - folder filter mask specification improvements
• The file and folder filter has been improved to include the full path when matching. The previous filter methods are still valid.
• Free installer registration details
• The Macrium Reflect Free Edition installer now allows for the modification of existing registration details.
• Improved USB3 device detection
• Macrium Reflect has been extended to take advantage of more USB3 controllers and hubs
• Bug fixes:
• Alternate Locations hint text
• After adding a folder as an alternate backup location, clicking into the folder edit box caused the hint text to not be selected. This has been resolved.
• Time remaining countdown
• An infrequent issue was raised where the time remaining at the end of a backup was being misreported as 1 second. This has been resolved.
• Autocomplete edit box visible during backup
• Pressing any key during a backup process would result, incorrectly, in the locations autocomplete edit box to become visible. This has been resolved.
• Installer Return button
• The button on the 'License Already Installed' error dialog was Cancel and should have been OK and Cancel. This has been resolved.
• Interactive backup auto shutdown
• Automatic shutdown of interactive backups would not initiate as Macrium Reflect was still running. This has been resolved.
• Rescue media USB device selection
• When creating a rescue environment to USB pen drive media, it was possible to select a blank USB device from the list. This has been resolved.
• Scheduled task deletion confirmation
• Macrium Reflect was not prompting the user for confirmation of scheduled task deletion. This has been resolved.
• Rescue media device detection
• When creating the rescue environment, Macrium Reflect could include devices that were not relavant to the WinPE environment. This has been resolved.
• Rescue media update driver
• Macrium Reflect would allow the user to specify (or search) the Windows\Inf folder for drivers, which can lead to incorrect or unsupported drivers being included in the rescue media. This has been resolved.
• WinPE Unsupported Devices dialog
• The Unsupported Devices dialog in WinPE was displaying devices which were unrelated to the process of backup/restore. This has been resolved.
• Bug fixes:5.0.4196:
• Windows PE network config issue
• The network configuration dialog in Windows PE could fail to set the second and subsequent Network Interface Cards. This has been resolved. If this issue affects you then please build fresh Windows PE rescue media after updating
• Crash during cloning operation
• A crash could occur at the end of a cloning operation if the source file system had errors in the NTFS $bitmap file. This has ben resolved.
• Free Edition Windows PE startup error
• For a few customers, the Windows PE rescue media could abort at startup. This has been resolved. If this issue affects you then please build fresh Windows PE rescue media after updating
• Free Edition startup issue
• A few customers have reported a program crash at startup. This has been resolved.
• Error reporting dialog improvement
• In the event of a program error, the error reporting message box would sit and wait for a response. This is now an auto canceling dialog if Macrium Reflect is running as a scheduled task.
• Free Edition installer registration details
• When re-installing the Free Edition of Macrium Reflect existing registration details were not remembered. This has been resolved.
• Bug fixes:5.0.4175:
• Error in destination path when editing an existing backup defintion
• When editing an existing backup definition an incorrect path could be populated in the destination field. This has been resolved.
• A local disk may not be detected
• Some customers have experienced a problem with disks missing from the Reflect backup tab. This was caused by an out of sync registry entry and has been resolved.
• What's new? 5.0.4168:
• Linux rescue CD update.
• Improved Linux CD restore performance and compatibility
• Automatic conversion from MBR to GPT.
• Pro and Server editions. If an MBR partition is restored to an empty disk and expanded to > 2TB in size then the target disk is now automatically converted to GPT to accommodate the new partition size.
• Bug fixes:
• Installer update issue.
• When upgrading using the Macrium Reflect installer, if the current installation was not on drive 'C' then the upgrade would not install to the same path as the existing installation. This has been resolved.
• Restore defaults.
• The global default setting 'Restore MBR' was not honoured when restoring a disk image. This has been resolved.
• Image file deletion error.
• If an image file that was split (e.g, into 4GB chunks due to FAT32) and was deleted using the Reflect GUI, this could cause a program crash. This has been resolved.
• XML validation error.
• Disks numbered > 9 could cause an XML validation error. This has been resolved.
• Windows PE (WAIK) download retry.
• If the WAIK download timed out then subsequent retries could time-out at the same point during the retry. This has been resolved.
• Linux rescue CD disk matching
• When restoring with the Linux rescue CD the incorrect disk could be defaulted for the restore process. This occurred for a a very specific sequence of disks and disk signatures and has been resolved.
• What's new? 5.0.4118:
• Network authentication
• Improved network authentication reliability in application defaults
• INF file parser improvements
• Improved INF file parser to support QLogic fibre channel controllers
• Bug fixes:
• IMPORTANT: v5 Free Edition WinPE WAIK bug
• Some users of the free edition WAIK rescue CD found that booting resulted in Macrium Reflect not being loaded correctly. This issue has now been resolved.
• If this issue has affected you, please update Macrium Reflect and create a fresh WAIK resue CD.
• Bug fixes: 5.0.4094
• Daylight Saving Time (DST) issue with incremental and differential file and folder backups
• A bug in the Windows _get_daylight() function could cause Reflect not to recognize that DST had changed. This caused files to be incorrectly flaged as modified when the last modified time was updated by Windows for DST. This has been resolved.
• Bug fixes: 5.0.4076
• Error saving XML file to a path with non ANSI characters
• The XML file save would fail if the destination path contained non ANSI characters. This could cause a problem where accented or non western characters were used. This has been resolved.
• Please burn a fresh rescue CD if this affects your saved files.
• Backup notifications and logs for XML validation errors
• If a backup definition (XML) file failed validation then no email or error log was produced. This has been resolved.
• Screen power management disabled during backup
• Macrium Reflect will now honour screen power management settings during a backup.
• Netbook screen size issue.
• The 'Image all local disks' dialog vertical height was too large for some netbook PCs. This has been resolved.
• Alternative backup locations error
• When multiple backup locations were used, the Disk Space Management purge logic was not executed and only full images and backups would be created. This has been resolved.
• What's new? 5.0.3940:
• New shutdown/suspend options.
• The backup dialog now includes the option to shutdown/suspend Windows. This can be enabled/disabled as the backup is running.
• New support submission function.
• Log files and other information can now be submitted directly to Macrium support from within Reflect.
• Rescue media drivers page enhancements.
• New add drivers wizard and enhanced functionality.
• USB rescue media enhancements.
• Auto detection of inserted USB flash drives and improved error handling.
• Default WinPE boot menu time-out.
• The previous default value of 30 seconds has been changed to 10 seconds.
• Bug fixes:
• Windows PE resolution incompatible with some Netbook PCs.
• Windows PE now detects for supported resolutions and adjusts according to availability.
• Linux logical partition problem.
• Some Linux installations, notably Ubuntu, could create extended partitions incompatible with Windows. This could cause restoration partition alignment issues. This has been resolved.
• Fixed crash in File and Filder backup search.
• If no .mrbak files were selected for search the a crash could occur if the search button was clicked. This has been resolved.
• Bug fixes: 5.0.3887:
• Dynamic Volume Disk Size Error
• Dynamic disks may report the incorrect size in the Reflect main window. This has been resolved.
• PC entering sleep mode during backup
• Windows could enter sleep mode during a backup or image. This has been resolved.
• Bug fixes: 5.0.3853:
• Windows PE - Synchronization fix
• Professional Editions of Macrium Reflect may have failed to update the Windows PE component files when patched previously. This has been resolved.
• Note: If Windows PE is out of date then two patches may be required to resolve this issue. Please run the update check directly after this update to download a full Windows PE patch
• VBScript scheduling problem with Windows XP
• The Windows XP task scheduler service failed to pass '-full', '-inc' or '-diff' parameters to scheduled VBScript files. This caused the schduled tasks to always run a full backup or image. This has been resolved.
• Bug fixes: 5.0.3843:
• Windows PE - Dual boot restore issue
• If a multi boot system was restored and the restored system partitions were swapped then this could cause a boot failure. This has been resolved.
• Windows PE - Multiple error messages when scanning for drivers
• When selecting the option to scan for drivers at Windows PE startup multiple error dialogs could be shown preventing the main application from loading until all were cleared. This has been resolved.
• Window position bug
• On some systems, if Reflect was closed when minimized the application could not be seen after restarting. This has been resolved.
• What's new? 5.0.3824:
• Create rescue media driver scanning
• The process of scanning for drivers to match devices will now include those previously matches.
• If you backup Files and Folders in WinPE then please recreate a new rescue CD/USB
• Bug fixes:
• Power saving options issue
• Power saving options were not being correctly observed when running incrementals or differentials. This has been resolved.
• Rescue media creation on USB pen drive
• USB pen drives containing an active partition of less than 300MB were being refused by the rescue media creation process. This has been resolved.
• File and Folder backup add folder issue
• When adding a folder for a file and folder backup under WinPE, the browse dialog was blank and the user could not select a folder. This has been resolved.
• File and folder backup 'Failed to open file' message
• An intermittent issue where File and Folder backups, which had been password protected, could not be opened. This has been resolved.
• What's new? 5.0.3818:
• VBScript incremental and differential run options
• Added VBScript file right click menu options for 'Incremental' and 'Differential'.
• Improved USB 3.0 host controller support
• Improved Windows PE driver file loading for USB 3.0 host controllers and hubs.
• If you are experiencing USB 3.0 problems then please burn a fresh Windows PE rescue CD after applying this update.
• Bug fixes:
• Problem when restoring an image when there are more than 10 attached local disks
• Restore could fail to start if the destination drive number was greater than 10. This has been resolved
• Registration failure when using proxy server to access the Internet
• Support has been added for proxy servers in the installer registration dialog
• Fixed Windows PE (WAIK) Rescue CD driver loading at startup.
• When booting with the WAIK Custom Windows PE rescue CD, drivers for unsupported devices may not load. This has been resolved.
• If you are experiencing problems with rescue CD device detection then please burn a fresh Windows PE (WAIK) rescue CD after applying this update.
• File and Folder backup 'folder exclusion mask' not saved
• File and Folder backup folder exclusions were not being saved to the backup XML file. This has been resolved.
• Program crash during driver scan
• Fixed crash if the driver scan dialog was closed during a scan.
• What's new? 5.0.3786:
• Windows PE rescue media USB3 support
• Added feature to identify additional USB3 devices.
• Bug fixes:
• Create WinPE rescue media
• Badly formed driver INF files could cause a problem when generating the Windows PE rescue CD. This has been resolved.
• Email
• emails may fail to be sent for non authenticated SMTP servers. This has been resolved.
• Windows XP add/remove boot menu
• This option could fail to work in Windows XP. This has been resolved.

---

Veranderingen voor v4.2.2733 - v4.2.3582

• Bug fixes:
• This update contains numerous minor fixes including...
• DSM purge sequencing problem
• The Disk Space Management (DSM) file deletion would occur before image verification. This has been change to after verification.
• File and Folder backup password problem
• Selecting 'Append to a specific backup' type for incremental and differential backups would stop the backup wizard advancing to the next page if the selected file was encrypted or password protected. This has been resolved.
• Verify Wizard resize error
• If Windows is set to use a font size > 96 DPI then the Verify Wizard would not display correctly. This has been resolved.
• File and folder backup and Daylight Savings Time problem
• Incremental and differential File and Folder backups would backup all files if a DST change occurred prior to the backup. This has been resolved.
• What's new? 4.2.3141:
• Linux CD update
• Updated isolinux boot code. This enables boot compatibility with a larger number of CD/DVD drives. The Linux update is included with this patch.
• Windows PE rescue CD update is available.
• Please click the 'Updates' button in the Rescue CD burn wizard for more information.
• Bug fixes:
• Extra icon on Win7 desktop
• When browsing an image an extra 'Computer' icon could be created on the Windows desktop. This has been resolved.
• Windows PE recovery boot menu option in Windows 7
• After a recent Windows update, the 'Other Tasks' > 'Add recovery boot menu' option stopped working in Windows 7. This has been resolved.
• Slow restore for large FAT 32 file systems
• Images containing FAT32 file systems > 100GB could be very slow to load. This has been resolved.
• Incorrect image comment displayed for diff/inc images..
• Backup sets containing differential and incremental images/backup would display the comment text, if set, for the full image/back. This has been resolved.
• Update to VSS.dll
• A VSS writer could fail if a file location referenced by the writer no longer exists. This error could propagate and may cause the snapshot to fail. This has been resolved.
• Fix mount point destination issue.
• Selecting a mount point as a destination for an image file could incorrectly show the message 'the destination is included in the backup' if the mount point was located under the root of a drive. This has been resolved.
• Update command line un-mounting to only unmount mounted drives.
• The command line switch 'reflect.exe -u' could umnount drives that were not drives used to mount Macrium images. This has been resolved.
• Change the location of the default editor for VBScript files for Windows Server 2008 R2.
• Unlike other versions of Windows, 'notepad.exe' is not available in folder 'c:\windows' for Server 2008 R2. The default editor location has now changed to 'c:\windows\system32'.
• What's new? 4.2.2952:
• New option to add comments to Images and file backups.
• Comments can be added by clicking the 'Advanced' button in the backup Wizard. Comments are shown as tooltips when selecting backups in the browse, verify and restore dialogs. See the help file for more information. This includes an update to the Linux rescue CD to show image file comments.
• Allow volume mount points as an image destination
• You can now select a volume mount point as the destination of an image file even if the path to the mount point is a sub-folder of the image being created.
• ReDeploy - Improved .inf file parsing
• Faster scanning of .inf files when using Macrium ReDeploy. Macrium ReDeploy is provieded with the Macrium Reflect Addtiions add-on, and enables restoration on Windows to dissimilar hardware.
• File and folder backup. Exclude hidden and system files is no-longer the default option.
• The default option when creating a new file and folder backup is now to include hidden and system files.
• Improved memory management for File and Folder backups
• Macrium Reflect uses less memory during file and folder backups. This prevents low memory issues when backing up large numbers (millions) of files and folders.
• Windows PE rescue CD update is available.
• Please click the 'Updates' button in the Rescue CD burn wizard for more information.
• Bug fixes:
• Fixed problem with slow network enumeration
• Macrium Reflect could become slow or unresponsive when navigation network shares for a backup destination. This has been ersolved.
• Fixed problem with network based incremental file and folder backups when the root backup folder is offline.
• Network incremental file and folder backups could cause an incremental backup to record the deletion of a folder if the root source folder was not available on a network share. The backup will now aborrt with a network error.
• Fixed problem with mounting differentials from the command line
• Using the command line option to mount a differential image could cause the full image to be mounted as well as the differential. This has been resolved.
• What's new? v4.2.2866:
• New Command line image mounting options.
• You can now mount and unmount image and backup files from the command line. Please type 'reflect.exe -h' from a command line for more information on this functionality.
• Unrestricted mounted image browsing
• Previously, if an image that was created on a different PC was browsed then 'private' folders couldn't be accessed. This is because NTFS security prevents, even Administrators, from accessing these folders and files. The 'Browse Image' dialog now allows this by enabling the new option 'Enable access to restricted folders' .
• Windows PE rescue CD update is available.
• Please click the 'Updates' button in the Rescue CD burn wizard for more information.
• Bug fixes:
• Apple Mac hybrid disks
• Macrium Reflect now correctly identifies and allows imaging of Apple Mac 'hybrid' disks. These were incorrectly displayed as GPT disks after the last update.
• DOS batch file fix
• Fixed bug in DOS bat file generation. Previously the generated bat file would not run because it was generated as a Unicode, not ANSI, file.
• Case sensitive file name extensions
• The '.mrimg' and 'mrbak' file name extensions were case sensitive when mounting the file. This meant that changing the file name of the generated file to be upper-case could result in the file failing to mount. This has been resolved.
• Program crash if VSS failed to provide a shadow copy name
• A program crash could occur if Microsoft Volume Shadow copy Service (VSS) completed successfully but failed to allocate a name for the shadow copy file. This has been resolved.

---

<<Terug naar software beschrijving